Re: Stuck relay

Gordon Gibby
 

Those relays are only rated for two amps @ a not very high voltage; Contacts will eventually wear out on any relay.  

You can probably find a slightly beefier relay, use it instead, and add a transistor buffer for the relay coil current if required


On Aug 15, 2019, at 05:30, KB2HSH <john.marranca@...> wrote:

I have a V3 uBITX that was stuck in TX last night...until I opened the rig up and tapped on the relays to "correct" the problem temporarily. Does anyone know which relay is to blame, and what the replacement is for it? Until this, it had been perfect for more than a year and a half. 



John KB2HSH 

Join BITX20@groups.io to automatically receive all group messages.