Re: Britx 40 Raduino Help

Michael Hagen
 

Ubit Raduino was adapted from the BitX, but they are different.

Ubit has male pins plugging into Radio PCB.?? They do not swap over.

73s

Mike, WA6ISP


On 6/24/2019 1:53 PM, Vic WA4THR via Groups.Io wrote:
BitX40s and uBitXs use the same physical Raduino assembly, which has gone through several arrangements of components over time, but is electrically the same. It comes with different software loaded from the factory depending on which rig it is supplied for. The instructions for the BitX40 are admittedly confusing as it shows the original configuration with separate 5 and 8-pin connectors, but they still work. You need to connect the 5 wire connector to the pins closest to the blue contrast pot and just ignore the other pins for the BitX40. Just make sure the yellow lead is on the end pin.

=Vic=
-- 
Mike Hagen, WA6ISP
10917 Bryant Street
Yucaipa, Ca. 92399
(909) 918-0058
PayPal ID  "MotDog@..."
Mike@...

Join BITX20@groups.io to automatically receive all group messages.