Re: Amateurradiokits Chassis and Grounding
toggle quoted messageShow quoted text
Yes Dremel makes it look untidy but I only did the inside and addes star washers to make cood contact. Checked resistances and all less than 0.1 Ohm
From: BITX20@groups.io [mailto:BITX20@groups.io] On Behalf Of Ian Reeve
Sent: Saturday, June 15, 2019 4:04 AM
Subject: Re: [BITX20] Amateurradiokits Chassis and Grounding
It can be scratched off but looks untidy.I use a counter sinking drill bit,the sort you use to sink cheese head screws flush,and that gives a neat paint free surround to the screw holes and potentiometer holes etc.
Powder-coat is often better chipped away, hence my earlier brace-bit suggestion. Likely much less dusty too :) Untried, and possibly less effective on fresh coating. If tried please report.