Re: Updated to a larger Nextion screen

Ian Reeve

Hi Mark,  Thx very much for your reply.Double checked everything and still no joy.The 4 pin connector as supplied with the screen was used and delivered power to the display but the blue wire had been crimped over the insulation and was not making contact.Indeed a gentle pull on the blue wire separated it from the problem solved.Thx and ,73. Ian M0IDR

From: <> on behalf of Mark Hatch <mark2382@...>
Sent: Thursday, June 6, 2019 10:02:45 PM
Subject: Re: [BITX20] Updated to a larger Nextion screen

Assuming you didn't mess up the blue and yellow wires... perhaps a mismatch between Nextion screen versions and KD8CEC?

Believe the current release s 1.2 (or 1.1+)?


Join to automatically receive all group messages.