Re: Implications of doing a "factory reset" on ubitx....

Vic WA4THR
 

As I understand it, if you were properly calibrated before converting to the CEC sketch, the program should have stored those values and that is what gets used for insertion if you do a factory reset. If you did not, whatever was previously programmed (as from the factory, for example) will be what is loaded if you do a reset. Both the Calibration and BFO values are what is replaced. If after doing a reset you find it is off frequency or the BFO is off, then you will need to redo the calibration.

=Vic=

Join BITX20@groups.io to automatically receive all group messages.