Re: 2N2222A getting super hot


 

Joe,

Which version is this ? In my V4 boards even the 3904 run hot.

Raj

At 29-03-19, you wrote:
Hi,

I performed Alison's mod and replaced the 3904’s with 2N2222A T08. I also paralleled the 22 ohm resistors to get the 11 ohms. Not to mention I changed q90 and replaced the resister with 2.55kohms. The 2n2222a’s that have their resistors lowered to 11 ohms get really hot. the other set of drivers that don’t have their resistors lowered ( im not sure why) dont get that hot but they get warm.

when testing amp draw from brown wire in line with amp meter and rv2 and 3 fully clockwise I get 0amp on key up. I turn up one 100ma, then the other. now im at 200ma. If I talk in the mic It swings to 400ma+. With CW key down it jumps to under 1amp.

I am on a dummy load

I dont have a power meter.

Does this make sense after doing that mod. is there a reason why those 2n2222a are getting so hot, can i bring RV1 and 2 up so its drawing more current?


Joe,
KD2NFC

Join BITX20@groups.io to automatically receive all group messages.