Re: mono band 2 meters rig based on the micro BITx circuit #ubitx #2meters

KC9SGV <kc9sgv@...>

Sorry group.
Wrong address.

On Mar 13, 2019, at 9:30 AM, KC9SGV <kc9sgv@...> wrote:

Thanks, Mike,
I am looking at all the options.
There are also SDR's that can do the 2.4 GHz uplink.
Couple that to a off the shelf Wifi booster into the RHCP feed for the dish.

Some ideas here...








On Apr 28, 2018, at 10:50 AM, Michael Kana <aa9il@...> wrote:

Go with a transverter and use a 10 meter IF. 
I have seen dual band 2 meter/432 MHz transverters out of the Ukraine or options such as Elecraft. Down East Microwave also sold vhf and uhf transverters but I believe they spun that business off to another builder. 
Or find a used one on the auction site. 

I have picked up the complete Elecraft line 6, 2, 222, and 432 used except for the 222 I’m building and driving with my Kx3 or dedicated 10 meter IF radio 
Mike AA9IL 

Warning!  This is transmitted over a non secure medium

On Apr 28, 2018, at 9:57 AM, Jerry Gaffke via Groups.Io <jgaffke@...> wrote:

Looks like the goal is to build something more challenging than the uBitx.
Beyond that what it is or does is totally up in the air.
Discussion seems to be moving toward a single band rig capable of SSB/CW about uBitx size.

A few thoughts of my own:
Phase noise from that si5351 gets worse as the freq goes up, maybe an si5338 or si5341?
Having all oscillators off a single reference makes calibration much easier.
Could be used for cross band ops if it receives on more bands than it transmits.
A wideband receiver could also be a spectrum analyzer, use digital techniques
on the audio when resolution better than the crystal filters is required.
Transmit mixer, drivers, final could be a separate board for each band desired,
zero transmit boards is an option for receive only.


On Sat, Apr 28, 2018 at 05:55 am, Tim Gorman wrote:
I'm lost as to what your goal is here.
1. The baofeng won't do SSB. Are you wanting to build a SSB unit or an
FM unit?
2. Are you thinking of a handheld or a desktop?
3. a phase line at 432Mhz won't be correct for 144Mhz. Are you thinking
a two-band unit or one-band unit?

Join to automatically receive all group messages.