Hello,
I try to compile antuino, but recevied many errors.


Best regards


Matjaz




C:\antuino\antuino-master\antuino_analyzer_27mhz_v2\antuino_analyzer_27mhz_v2.ino:
In function 'int calibrateClock()':

antuino_analyzer_27mhz_v2:62: error: 'xtal_freq_calibrated' was not
declared in this scope

prev_calibration = xtal_freq_calibrated;

^

antuino_analyzer_27mhz_v2:65: error: 'si5351aSetFrequency_clk1' was not
declared in this scope

si5351aSetFrequency_clk1(10000000l);

^

C:\antuino\antuino-master\antuino_analyzer_27mhz_v2\antuino_analyzer_27mhz_v2.ino:
In function 'void takeReading(long int)':

antuino_analyzer_27mhz_v2:300: error: 'si5351aSetFrequency_clk2' was not
declared in this scope

si5351aSetFrequency_clk2(local_osc);

^

antuino_analyzer_27mhz_v2:304: error: 'si5351aSetFrequency_clk0' was not
declared in this scope

si5351aSetFrequency_clk0(newfreq);

^

antuino_analyzer_27mhz_v2:311: error: 'si5351aSetFrequency_clk1' was not
declared in this scope

si5351aSetFrequency_clk1(newfreq);

^

C:\antuino\antuino-master\antuino_analyzer_27mhz_v2\antuino_analyzer_27mhz_v2.ino:
In function 'void setup()':

antuino_analyzer_27mhz_v2:326: error: 'xtal_freq_calibrated' was not
declared in this scope

EEPROM.get(MASTER_CAL, xtal_freq_calibrated);

^

antuino_analyzer_27mhz_v2:352: error: 'si5351aOutputOff' was not declared
in this scope

si5351aOutputOff(SI_CLK0_CONTROL);

^

C:\antuino\antuino-master\antuino_analyzer_27mhz_v2\antuino_analyzer_27mhz_v2.ino:
In function 'int menuSelectAntAnalyzer(int)':

antuino_analyzer_27mhz_v2:535: error: 'si5351aOutputOff' was not declared
in this scope

si5351aOutputOff(SI_CLK0_CONTROL);

^

C:\antuino\antuino-master\antuino_analyzer_27mhz_v2\antuino_analyzer_27mhz_v2.ino:
In function 'int menuCalibrate2(int)':

antuino_analyzer_27mhz_v2:594: error: 'si5351aOutputOff' was not declared
in this scope

si5351aOutputOff(SI_CLK0_CONTROL);

^

C:\antuino\antuino-master\antuino_analyzer_27mhz_v2\antuino_analyzer_27mhz_v2.ino:
In function 'int menuSelectMeasurementRx(int)':

antuino_analyzer_27mhz_v2:614: error: 'si5351aOutputOff' was not declared
in this scope

si5351aOutputOff(SI_CLK0_CONTROL);

^

C:\antuino\antuino-master\antuino_analyzer_27mhz_v2\antuino_analyzer_27mhz_v2.ino:
In function 'int menuSelectNetworkAnalyzer(int)':

antuino_analyzer_27mhz_v2:633: error: 'si5351aOutputOff' was not declared
in this scope

si5351aOutputOff(SI_CLK1_CONTROL);

^

exit status 1
'xtal_freq_calibrated' was not declared in this scope



On Fri, 15 Feb 2019 18:05:46 +0530, "Ashhar Farhan" <farhanbox@...>
wrote:

Of all, this should be your first project. It will all the others.- f
On Fri 15 Feb, 2019, 5:56 PM gerrykav via Groups.Io

Links:
------
[1] mailto:yahoo.co.uk@groups.io
[2] https://groups.io/g/BITX20/message/65375
[3]

mailto:BITX20@groups.io?subject=Re:%20Re%3A%20%5BBITX20%5D%20Sweeperino%3F

[4]

mailto:farhanbox@...?subject=Private:%20Re:%20Re%3A%20%5BBITX20%5D%20Sweeperino%3F

[5] https://groups.io/mt/29791995/180494
[6] https://groups.io/g/BITX20/post
[7] http://www.phonestack.com/farhan/bitx.html
[8] http://www.hfsignals.com/index.php/bitx40/
[9] http://www.hfsignals.com/index.php/ubitx/
[10] https://amateurradiokits.in/store/
[11] http://ubitx.net/
[12] https://groups.io/g/BITX20/wiki/home
[13] https://groups.io/g/BITX20/editsub/180494
[14] mailto:BITX20+owner@groups.io
[15] https://groups.io/g/BITX20/leave/defanged