Re: Newb help with uBitx40

Vic WA4THR
 

After the uBitX came out, the Raduino design was modified and is the same hardware for both the uBitX and the BitX40, so the published instructions for connecting it on the HFSignals website are confusing, at best. You should have 2 wire harnesses, one with 8 wires and one with 5. You still connect one plug to the 8-pin header as shown, but the other plug now connects to the 16 pin header with the bent pins on top in your picture. You just plug into the 5 pins closest to the blue contrast pot with the yellow wire on the very end and leave the other pins not connected to anything.

=Vic=

Join BITX20@groups.io to automatically receive all group messages.