Re: LPF kit for ubitx v3

Sascha Bohnet | DL5SMB

Hi Ted - justĀ  as a tip:

If you do not plan on using the old relays, it is a LOT easier to sacrifize them :-)

Using solder wick it was easy for me to get rid of most of the solder and loose the relays a bit.

In fact i had nearly no difficulties at all to get at least 1mm between he pcb and the relays when i used a screw driver as leverage:

And if you then just use a a thin saw blade without the frameĀ  and cut all the pins, it is easy to take the relays off and remove the single pins later.

Join to automatically receive all group messages.