Re: a simple spur fix
toggle quoted message. . .
A bit more elegant than my "interim" solution
On Saturday, November 10, 2018, 1:33:54 PM PST, Glenn <glennp@...> wrote:
Jerry, for what it's worth i did a small pcb for Si5351 buffering in an old post:- buffer board
It was designed to fit on the uBITX board adjacent to the "Raduino1" socket. Cut the 3 tracks from Si5351 and connect to the pads on the pcb. Then the outputs of the board are linked to adjacent points, now buffered.