Re: 80 Meters Harmonics Fix Proposal

Howard Fidel

The fifth and the 7th are at -45dB now. You are missing my point. The design of the filter directly effects the level of the harmonics. Yes, the stray  capacitance creates a "sneak" path around the filter. However, the input and output capacitors of the filter act as a divider to that "sneak" signal. If you double the output capacitance, you 1/2 the sneak signals amplitude, reducing it 6 dB. If you create a model of each  of the filters in a simulator, and put 8 pF from input to output, you can clearly see the improvement in the attenuation of the filter for the higher output capacitance.
All the data I have seen shows that a 6 dB improvement would just make the uBitx legal.


On 9/3/2018 2:51 PM, Warren Allgyer wrote:

When I measured 80 meter harmonics the particularly troublesome ones were 5th at 18 MHz and 7th at 25 MHz. In both cases the attenuation of the stock uBitx at those frequencies was limited by the layout of the board and by the coupling of relays sharing both filter input and output in the same frame. In such cases the characteristics of the filters, both existing and any modifications are immaterial. The attenuation of the stock filter supplied is more than adequate. But the harmonics bypass the filter and go via I/O coupling straight to the output. Please measure the 5th and 7th harmonics on CW. I think you will find you have not done much to improve the stock situation.


Join to automatically receive all group messages.