Re: Using radino from ubitx on bitx 40?

Jerry Gaffke
 

You need to load the Bitx40 firmware, as Allison mentioned.
Only other issue is the uBitx has pins soldered in place so the Raduino can plug into the main board,
the Bitx40 uses a 5 pin wire harness at that connector.
See this thread:  https://groups.io/g/BITX20/message/58169


On Sun, Sep 2, 2018 at 10:11 AM, Tech Guy wrote:
Has anyone used a ubitx radino with a bitx 40? I ordered a bitx 40 before it came with a dds. Changing the IF setup in software? Thanks
-John

Join BITX20@groups.io to automatically receive all group messages.