1. BITX20@groups.io

Re: Nextion Basic 3.2 Display will not update #ubitx

V Zecchinelli
 

Thanks Pat.  Sounds like a great idea but not sure I know how to do that.  Would I cobble together a USB to connect to the 5V, RX, TX, GND?  At this point the display is not connected to the uBitX.  I have 5V & GND connected to USB adapter and computer.


On 8/13/2018 2:33 PM, pat griffin wrote:
You could try downloading directly to the display. It’s slow but it would tell you if the display or card is bad.
73
Pat aa4pg


On Aug 13, 2018, at 1:02 PM, Joe <joeman2116@...> wrote:

Hi,
I have seen this issues several times

1. Make sure your power source is good.
2. Try another microsd card.

Usually one of the above clears the problem

Joe
VE1BWV



On Mon, Aug 13, 2018, 2:47 PM V Zecchinelli <n1vin@...> wrote:
I have spent most of today searching through messages and wiki to no avail.  I am using the basic 3.2 Nextion display and am trying to upload the tft file I downloaded from ubitx.net.  SD card is 8Gb and is formatted FAT32 and tft file copied to it.  When I insert the card into the Nextion display it shows Baud:   9600 and SD Card Update....... and stalls at that point.  I have waited as long as an hour.  Am  missing something or perhaps I procured a bad Nextion or SD card?
Thank you for any input.
73 Vince N1VIN

Join BITX20@groups.io to automatically receive all group messages.