Re: RFI from uBitx TX after AGC and other mods installed

Rick Price
 

I think it would be eaiser to shield the little pcb with foil before moving it due to the interconnect wires.  May try that first as the pcb is very small and mounted to the back of the RF Gain pot. The PCB is fabircated like Don explained in his first description of the board. My PCB is not the Kee's kit. I'll let you know how the shielding works out.
Rick
KN4AIE



From: BITX20@groups.io [mailto:BITX20@groups.io] On Behalf Of John KC9OJV
Sent: Sunday, July 01, 2018 9:49 AM
To: BITX20@groups.io
Subject: Re: [BITX20] RFI from uBitx TX after AGC and other mods installed

Rick, If it's the PCB what about putting it below the ground plane in the same relative position as the suggested spot next to the RF relays?

John
KC9OJV

Join BITX20@groups.io to automatically receive all group messages.