Re: KD8CEC Firmware S-Meter usage

Don, ND6T
 

Before you give up on Ian's circuit entirely, let's take a look at a few voltages Mark. With the '386 wired up as shown, and with the meter measuring from common ground, pin #6 should measure pretty close to +5 volts. Pins #2, #3, and #4 should all be at 0 volts. Pin #5 should be around +2.5 volts. Is this what you measure? Did you connect a capacitor between 7 and 8?. -Don

Join BITX20@groups.io to automatically receive all group messages.