Re: Messed up removal of TDA2822

Sajid Rahum
 

Thank you both Raj and Sharma.

Did it both ways - cut at tips closer to the chip. But either the solder iron is not too hot - I kept it around 200c.  Anyway, i then did the old fashioned way by wiring up the 8 pin socket.

My main question is if you look at the mainboard bottom side - the solder fell off (top left pin); not sure where it was connecting to so that if i need to wire it where to take it to?

Join BITX20@groups.io to automatically receive all group messages.