Re: RF power chain mods and improvements..
The MMIC has a absolute maximum voltage of 4.5 VDC. Assuming you use a transformer (actually you must to get the drive level you need for the output stage) you an only use a +2 volt supply for the device for a 4 v p-p swing. So you need at least 1:2 step up transformer so the driver needs to source more current to drive it. I am completing the design of a driver that is flat to 30 MHz and will post it soon. It uses a current driver and a dual opamp replacing everything from VR1 to T10.
On 6/8/2018 11:50 PM, Jerry Gaffke via Groups.Io wrote:
And if you really wanted an MMIC for the pre-driver,