Re: uBITX Firmware CEC Version 1.08 Release #ubitx

Jack Purdum
 

You can do that yourself. If you don't know how to change the firmwear, there are a bazillion links online to show you how. May as well learn, as there may be other things you'd like to change down the road. Near line 1200 in setup(), you will find code similar to:

  if (userCallsignLength > 0 && ((userCallsignLength & 0x80) == 0x80)) {
    userCallsignLength = userCallsignLength & 0x7F;
    printLineFromEEPRom(0, 0, 0, userCallsignLength -1, 0); //eeprom to lcd use offset (USER_CALLSIGN_DAT)
    delay(2000UL);        // Increase from 500
  }
  else {
    printLineF(0, F("uBITX v0.20"));
    delay(2000UL);        // Increase from 500
    clearLine2();
  }
 

The line in YELLOW will increase the delay time from a half second to two seconds.

Jack, W8TEE

On Friday, May 25, 2018, 3:01:37 PM EDT, atouk <atouk@...> wrote:


One tiny quibble.

Can you make the version display delay on startup a bit longer.  It flies by too fast to read.


On 5/23/2018 11:40 AM, Ian Lee wrote:
uBITX Firmware CEC Version 1.08 Release

Version 1.08 is the first major release since 1.061
Version 1.08 includes all additions or improvements from 1.07 to 1.07, 1.071, 1.073, 1.075 since 1.061, Version 1.08 has minor fixes in 1.075 (Beta)

Changed name to Version 1.08 in Version 1.075 Beta with minor fixed.

 
1.Receive performance is improved compared to the original firmware or version 1.061
2.ATT function has been added to reduce RF gain (Shift 45Mhz IF)
3.Added the ability to connect SDR. (Low cost RTL-SDR available)
4.Added a protocol to ADC Monitoring in CAT communications
5.Various LCD support, 16x02 Parallel LCD - It is the LCD equipped with uBITX, 16x02 I2C LCD, 20x04 Parallel LCD, 20x04 I2C LCD, 16x02 I2C Dual LCD
6.Added Extended Switch Support
7.Support S Meter - Any S-meter is compatible.
8.Added S-Meter setting assistant to uBITX Manager
9.Add recovery mode (such as Factory Reset)


There have been many other improvements and fixes. More information is available on the blog. 
Please see the link below for details.
 
You can download HEX file and uBITX Manager from the link above. You can also download the source code at https://github.com/phdlee/ubitx and see all the changes I've made so far. If there is a non-critical bug in the public version, I will link to the new firmware in the above blog.
 
--
Ian KD8CEC
kd8cec@...
http://www.hamskey.com 

Join BITX20@groups.io to automatically receive all group messages.