Re: Low Power Output for Hendricks BitX20A - Watt meters and Scope readings do not agree.... #bitx20

Jerry Gaffke
 

Correction, 10x does not work, 1x does.
10x would read double if that 9meg resistor inside the probe was more like 4meg.
And that could easily be measured with an ohmmeter from probe tip to bnc center pin.


On Thu, May 17, 2018 at 09:58 pm, Jerry Gaffke wrote:
And that since the 10x probe works, the scope is doing fine.

Join BITX20@groups.io to automatically receive all group messages.