Re: Removing solder resist.


MAX <max@...>
 

I didn’t mean flux.  I meant the green material that coats most of a PC board.  Some of it usually has to be removed to modify a board.

 

Regards.

 

Max K 4 O D S.

 

I've Never Lost the Wonder.

 

Antique Electronics Site: http://www.angelfire.com/electronic/funwithtubes/

 

 

From: BITX20@groups.io [mailto:BITX20@groups.io] On Behalf Of ajparent1/KB1GMX
Sent: Wednesday, May 09, 2018 12:43 PM
To: BITX20@groups.io
Subject: Re: [BITX20] Removing solder resist.

 

I presume you means the colored overcoating.  IF so its an epoxy material and very tough
so abrasion/scraping is the near only means as anything aggressive enough to soften it 
will likely damage other parts.

If your removing flux residue, Isopropanol-91% cheap and any pharmacy has it.
Do not use near fire or flame.

Allison

Join BITX20@groups.io to automatically receive all group messages.