Re: Teensy 3.5/3.6 upgrade for uBITX

Dennis Zabawa
 

I have gone off the deep end with by uBITX.  My current configuration, basically a rats nest on the bench is:
  • Main CPU (Teensy 3.5) handles the SI5351 control (I2C), the 20x4 LCD Display (I2c), input from the front panel controller (I2C), control of an AF DSP (I2C), control of a CW Keyer (I2C), monitoring of an SWR bridge, control of an RF Digital Attenuator (SPI)
  • Front Panel Controller (Pro-Mini) interfaces with a rotary encoder w/switch and seventeen push buttons
  • AF DSP (Teensy 3.5) implementing Low Pass, High Pass, Band Pass, Notch Filter and pass-through
  • CW Keyer (Pro-Mini)
  • Kits and Parts dot Com, SWR Bridge for tuning and power monitoring
  • RF Digital Attenuator from SV1AFN used to adjust drive power to PA for tuning and adjusting power by band to keep the power output more consistent
This is my front panel design:

Join BITX20@groups.io to automatically receive all group messages.