Re: SI5351 simultaneous clock changes #ubitx-help

Jerry Gaffke

I'm not convinced there's a need for continuous ALC during transmit
But would be very cool to set the appropriate power out level when tuning up on a new band.

Or better yet, tune up on each band into a dummy load during calibration,
and store appropriate 45mhz IF shifts into a lookup table.


On Mon, Apr 2, 2018 at 03:19 am, John wrote:
Worse case scenario I will disable the clocks, change frequency then re-enable them as you mentioned.

Join to automatically receive all group messages.