Re: RD16HHF1 power curve flattening...some

MVS Sarma
 

we can get mpsh10 in smd MMBTH10 AND  the pin out is same as present device.
 They are cheap enough on ebay.  Hope the info helps.

regards
sarma
 vu3zmv

Regards
MVS Sarma
 

On Wed, Mar 21, 2018 at 5:11 PM, John <passionfruit88@...> wrote:
Hello Nik,

How did you go with the feedback issue?

My power amp mods in summary:  finals as RD16HHF1s, feedback resistors R261/R262 as 820 Ohms, Transformer 2T primary / 3T secondary on BN43-202, 180pF across the output transformer primary and 330pf across R87/R88. That's all...in a way.

Heavily inspired by Erhard's (DF3FY) information as displayed on uBitx.net.

Results per band at 14V supply, RV1 at %60, RD16's biased at 250mA each:
Band      output power   Total current
80M        22W                         2.9A
40M        20W                         3.2A
30M        16W                         2.3A
20M         16W                        2.7A
17M         15W                        2.4A
15M         12W                        1.6A
12M         12W                    not measured
10M         12W                        1.7A

At 22W the output transformer does get warm but not the LPFs.

Wound back RV1 to get 9-10W on the high frequency bands and 16-18W on the lower ones.

All the best,

73, John (VK2ETA)


Join BITX20@groups.io to automatically receive all group messages.