Re: RD16HHF1 power curve flattening...some

Glenn
 

I completed my mockup of the PA driver stages.

as previous post:
  • used MPSH10's in all stages. 
  • Used FT37-43 toroids all wound with 10 turns 0.25mm wire either tri- or bi-filar according to original Sch.
  • Bypassed all emitter resistors with a 220pF cap.
  • swept from C80 input to T10 secondary (as wound)

Result is a very flat response. Better than 1db from 3Mhz to 54MHz.

glenn
vk3pe

Join BITX20@groups.io to automatically receive all group messages.