Re: How to order a Raduino

Tim Gorman

Thanks, Mike.

I just sent you some money for one of your assembled ubitx boards. I
could assemble it myself but I just don't know where to get the time!

tim ab0wr

On Thu, 8 Mar 2018 14:07:47 -0800
"Michael Hagen" <motdog@...> wrote:

I did it on an old Allard version. Use the library that is available,
and edit the prints to the LCDs.

#include <Wire.h>
#include <LiquidCrystal_I2C.h>

Set up LCD and its I2C address.

LiquidCrystal_I2C lcd(0x27, 2, 1, 0, 4, 5, 6, 7, 3, POSITIVE);

My boards got a dedicated 4 Pin Molex for I2C at 5V.

Find the library and run some examples to get started.

73's Mike

On 3/8/2018 1:09 PM, Tim Gorman wrote:

Is there code out there for utilizing your RaduinoUMax with an I2C

I'm running a bunch of jumpers from the Raduino to the lcd and it's
a mess. Running four jumpers would be a lot cleaner installation.

tim ab0wr

On Thu, 8 Mar 2018 10:31:48 -0800
"Michael Hagen" <motdog@...> wrote:

I have the "Better" Rauinos for BitX and uBit.

I have sold over 50 to folks on this list.

Shipping to foreign countries is usually $15-20. I can give you a
shipping price from the US Post.

Take a look at attached documents.

73's Mike, WA6ISP

On 3/8/2018 9:40 AM, kir@... wrote:
Hi guys,

As I have an old Bitx40 with analog VFO, I would order a Raduino.
How can I do that ? found no info.
I do not have the correct email.

Can you help ?
Tnx and 73's from Felix/ON4KIR

Join to automatically receive all group messages.