1. BITX20@groups.io

Re: uBITX Firmware CEC Version Added WSPR function, I am looking for a beta tester. #ubitx

Ian Lee
 

Carlos

Thanks for trying test.

1.First, test with a communication program such as Ham radio deluxe or Wsjt-x to check the communication status.
2.Occasionally, such a problem can occur if the thickness of the USB cable is thin.
3.uBITX Firmware CEC Version may not be able to CAT  communicate when WSPR are used.
4.This is when you entered the WSPR menu.

please Test and tell us your results.

Ian KD8CEC

2018-03-09 3:21 GMT+09:00 Carlos E. Wenzel <Ik2yra@...>:

Hello Ian..
I have the same problem....

 "Error Receive Length = 0/1027"


2018-03-08 17:21 GMT+01:00 Ian Lee <kd8cec@...>:
All
uBITX Firmware CEC Version Added WSPR function, but It is still a test level.
so, I am looking for a beta tester who has uBITX and knows how to use WSPR.

I used the following method to put the WSPR function in the small space of uBITX.
 - All settings required for WSPR transmission are pre-entered in uBITX.
 - Callsign, location(2alpha, 2 number), db and frequency information to be used for transmission are stored in uBITX.
 - Outdoors, uBITX and antenna are all you need to transmit WSPR with pre-entered information.

you do not need to make any modifications to your uBITX to use WSPR.
For more information, click on the link below.
(You can download uBITX Manager as firmware for WSPR.
Firmware is based on Cat Support uBITX Firmware CEC Version 1.04.)
http://www.hamskey.com

--
Best 73
KD8CEC / Ph.D ian lee
kd8cec@...
www.hamskey.com (my blog)




--
Carlos Wenzel
ik2yra@...
+39-3284684518
Skype: IK2YRA



--
Best 73
KD8CEC / Ph.D ian lee
kd8cec@...
www.hamskey.com (my blog)
Join BITX20@groups.io to automatically receive all group messages.