toggle quoted messageShow quoted text
Bill, if you’re worried about your finals just turn the drive back a bit.
On Feb 6, 2018, at 18:34, bill richardson <ng1p.bill@...
Doing some testing with my uBitx on 160m with a 160m LPF attached to the output. I’m seeing about 15 Watts out but the current draw is running very high at just over 3 amps. So not usable on 160m at the finals will blow I’m sure. The bias stays normal
so it’s something else? I wonder what others are seeing?
Doing the same test on my Bitx40 on 160m I see about 10 Watts out and the current is about 1.5 amps and very usable.
Thanks Bill Ng1p
On Jan 14, 2018, at 1:40 PM, Art Olson <olson339@...
On Jan 14, 2018, at 1:29 PM, bill richardson <ng1p.bill@...
I got the connector from Amazon
On Jan 14, 2018, at 1:17 PM, Art Olson <olson339@...
What are you using to connect the filter to the antenna connector on the back of the rig
Art - N2AJO
On Jan 14, 2018, at 1:12 PM, K9HZ <bill@...
Very smart. External. Then you can change it to whatever band you want at any time.
Dr. William J. Schmidt - K9HZ J68HZ 8P6HK ZF2HZ PJ4/K9HZ VP5/K9HZ PJ2/K9HZ
Owner - Operator
Big Signal Ranch – K9ZC
Owner – Operator
Villa Grand Piton - J68HZ
Soufriere, St. Lucia W.I.
On Jan 14, 2018, at 12:00 PM, bill richardson <ng1p.bill@...
This is what I did for my bitx40 for use on 80 and 160. Using the Qrp lab filters