Re: No TX #ubitx

philip yates
 

Easy to check TX, put the µBitx into TX CW mode with a power meter and dummy load attached.

If the output is ok, the power meter should show power.
I used this method as my mike was not connected properly. All sorted now.

Phil - G7BZD

On Sat, Jan 27, 2018 at 3:38 PM, César EA3IAV <Cesarleon@...> wrote:
I am experiencing the same issue. I see no needle movement on the power meter but i get heard on a nearby receiver.

i have changed seceral times the transistors just in case. The same results 


Join BITX20@groups.io to automatically receive all group messages.