Re: Caveat Emptor!

Jack Purdum

I wasn't responding to John. The one I responded to, #40373, was on the same thread, and contained the quote that I posted. When I saw his post, I responded (#40375) . John jumped on me seven posts later (40382) because I mentioned the I2C issue, which are a problem for some OLED displays. Had he read back through the thread, he would have seen what I was responding to.

So, no, I'm not going to my room.

Jack, W8TEE

From: Vince Vielhaber <vev@...>
Sent: Friday, January 26, 2018 4:52 PM
Subject: Re: [BITX20] Caveat Emptor!

Now settle down or I'm sending you to your rooom without dinner!

John wasn't the one with the 0.92 displays.  Check your own post!


On 01/26/2018 04:30 PM, Jack Purdum via Groups.Io wrote:
> "I have 5 of the small 0.92 inchdisplays but have not been able to get
> any of them to work. These are TWI or I2C interface
> and my Arduino does not recognize any."
> Before you get mouthy, check the initial post.
> Jack, W8TEE
> ------------------------------------------------------------------------
> *From:* John P <j.m.price@...>
> *To:*
> *Sent:* Friday, January 26, 2018 4:00 PM
> *Subject:* Re: [BITX20] Caveat Emptor!
> On Fri, Jan 26, 2018 at 12:21 pm, Jack Purdum wrote:
>    Do you have the correct I2C address for the displays?
> They're not I2C displays; they're the 3.5: TFTs for the analyzed.
> --
> John - WA2FZW

  Michigan VHF Corp.


Join to automatically receive all group messages.