Re: No TX #ubitx

 

Fully clockwise is the minimum current!

At 02-01-2018, you wrote:
Actually, I was going to post this as a separate issue, but in the PA bias step my initial reading was outside the range mentioned in the directions. With both bias pots at fully clockwise, I measured 420 mA when PTT is depressed. The directions indicate it should be 470 - 500. Could this be the problem?

Fwiw, my power supply is a 30A 12v deal.

Again, many thanks for the help!

Join BITX20@groups.io to automatically receive all group messages.