Re: Final 3D printed case design
Diver Martin <diver.martin@...>
toggle quoted messageShow quoted text
Version 0.6 posted to the groups.io files section. A 0.1" shift in the window, as when I was doing all the calipering, the display was actually plugged in one pin the wrong direction. Also updated the height of the heatsink windows slightly so that they fit a little more smoothly. The enclosure width is now 0.08" instead of .125, so that the audio jacks/etc can go all the way through and have the nut fit on the front.
On Sat, Dec 23, 2017 at 5:08 PM, Martin Held <diver.martin@...> wrote: