Re: Nano on-board regulator...was: I made a mistake

DuWayne Schmidlkofer
 

I have tried several of the small switcher regulators, but in most cases I had to add additional filtering to reduce noise. When I have to run a Nano or pro-mini with more than about a 9V, I just feed it through several 1N4002 diodes in series to drop the applied voltage down to the 7-9 volt range. This makes the little regulator on the Nano or Pro-mini much happier.



--
DuWayne  KV4QB

Join BITX20@groups.io to automatically receive all group messages.