Re: Volume, on/off switch

Soundararajan Ra.
 

For raduino tuning whether we  can use 100k linear pot instead of 10k ?
Recently i procure 100k conductive plastic film pot (fernel make ) which is very smooth and suppose to be long losting comparing with carbon film pot.
Soundar
Vu2RJW

On Wed, Mar 1, 2017 at 4:36 PM, Ion Petroianu <ion.petroianu@...> wrote:

Hi Mike,
The ear sensitivity is not linear, so, that is the reason the volume pot should be logarithmic.
Now for the tuning, the way the software is written, you have 50 Khz of tuning range on 300 degrees of rotation and 1024 steps in the analog to digital converter (10 bit A/D). A change in position of the tuning pot with 0.3 deg. will change the frequency. Using a multi turn pot will increase the amount of movement required to have a change in frequency.
Another way of improving tuning feel will be by reducing the tuning range to 25 KHz or even 10 KHz by modifying the software, or installing a rotary encoder (also with modified software).
There is another sketch (firmware) that is using the pot in a different way. As long as the pot is in the middle position nothing happens. When you turn the pot frequency starts changing. The speed of change is increased with the angle of rotation. Once where you want to be return the pot to the middle position and you are tuned.
73,
Ion
VA3NOI


--
Ion

VA3NOI


Join BITX20@groups.io to automatically receive all group messages.