Bitex40 power output.

Soundararajan Ra.

In my bitx40 during testing upto three qso power output about 7 watt .Then suddenly no output ,when i measure drain current of IRF 510 on mic disconnect conditions it was 90ma and with speaking current about 110 ma.
I thought IRF may qrt .
I changed new irf 510 (ST make) adjusted rvi1preset in mic out condion drain current was 70 ma at maximum rvi1 position and when i speak current s only 120 ma .my sx200 swr/power meter at 20w range reading is 3to4watt.
is it correct or what is to be done to raise the power.
Your suggestions welcome.
Thanks in advance.

Join to automatically receive all group messages.