Re: Chip pad

John Fisher <k5jhf@...>
 

Very nice pads, applicable to many projects. I use an 8 pin Motorola microcontroller in my Morse Code training device, and this will be great for those projects too. Info on the MCD is on my webpage below.

 Regards,
 John
 
=============================================
email:      k5jhf@...
photos:   http://photos.yahoo.com/k5jhf@...
files:       http://briefcase.yahoo.com/k5jhf@...
webpage: http://www.geocities.com/k5jhf@...
callsign:    K5JHF
=============================================

-----Original Message-----
From: Charles [mailto:charles@...]
Sent: Monday, June 28, 2004 4:20 PM
To: BITX20@...
Subject: [BITX20] Chip pad

Hi

I was wondering how to make a pad for the chip then thought use a
piece of PCB with a cut through the copper in the centre and then
additional cross cuts of the copper to make the lands for the holder.

By bending out the legs of the holder they can be soldered to the pad.

Chip Pad Photo added to my album.

Charles G4VSZ




Join BITX20@groups.io to automatically receive all group messages.