I like the idea of the option of bend track but if it is going to cause a 'standards' issue I would like to see more info on the subject. A quick check on the Bend Track site shows a straight junction

The junction modules would have the orange line break away not he red, so this would still allow the four track main. Geoff if a base was made for the t-trak modules to sit on instead a banquet table

Maybe we could develop some sort of leg extensions for a "banquet" table sothat a standard folding table could be raised to the necessary height andleveled?

Maybe a fifth cirner module would be called for. I don't remember the exact configuration, but I think that Mike LaCasse has brought a two piece junction. 1 piece was the corner and the second piece

Mark, I think that that is a great idea. It would also demonstrate to the public that T-Trak is designed to "just sit on top of a table" rather than require any special legs or capentry or what have

I have drawn up a design in AutoCAD showing an idea for the track plan. It is posted in the files section. This will also give everyone an idea of what can be done with layout design if everyones

Hello, This email message is a notification to let you know that a file has been uploaded to the Files area of the AlbanyNTRAK group. File : /NTRAK Corner-junction.jpg Uploaded by :

When I get a chance this week I will draw up the same junction/corner but with only the red.

Hi everyone I have just caught up on all the messages. Thanks for all the great info. Lets recap everything, John V. Brain H. and myself will be purchasing everything we need to build the corners. At

wrote: junction/corner Thanks John the drawing is great!

Hello, This email message is a notification to let you know that a file has been uploaded to the Files area of the AlbanyNTRAK group. File : /Jct Module JHL 01.jpg Uploaded by : nycrr8

Hi John and gang. I just uploaded a crude sketch of a corner with junction that Mike LaCasse had in some layouts with a branch line that ended in a double tracked Bend Track end loop. I think that

Mike, Is your junction module based on a standard three foot corner framework? Maybe we should table discussion on whether or not to junction until after the Egg show and come to a decison at the

Reminder from: AlbanyNTRAK's Calendar Title: PCC show Date: Sunday

Hey guys, Doug and I had a very successful work session, we now have the framework done for two complete 3' corners. We were going to suggest that we bring one of the corners to the Egg show to work

John, Could you (or Doug) please post pictures of the stages of construction of these corner modules (and future stages as you progress). I think that it would be very interesting to see how

I think you can get in at 7:00 on Sunday - I'm not 100% positive - I'll check.

Most of you got an email reminder, but I need to hear from some people about their interest in bringing modules to the GTE show. Write, fax, call, or email. Actually, email is preferred... And I

Geoff and all, I am planning to bring my inside corner to the show. Doug and I are going to slap the tracks down and wire one of the new corners so that will take care of that problem. I think Mike

yes I think we should have a sign asken if someone has a place that we may use to set up the layout so we can work on it or if someone knows of someone. John can you make something up in autocad? You