Date   

Re: Train Show

Brian Hilgenberg
 

Doug,I'll be there around 10:30-11:00.
Brian

On Saturday, November 27, 2021, 11:03:04 AM EST, Doug Dederick <ddederic@nycap.rr.com> wrote:

Hi Matt  Saturday set up time is fro 9:00 to 4:00  I will be there around 10AM to help with other things and will be there most of the day.

On Nov 27, 2021, at 9:50 AM, Matt Rossman <sweakyboot@gmail.com> wrote:

I can set up on Saturday after 12. What are the hours that we can set up?

I’ll most likely be there shortly after 8 on Sunday as well.

Matt





Re: Train Show

Doug Dederick
 

Hi Matt Saturday set up time is fro 9:00 to 4:00 I will be there around 10AM to help with other things and will be there most of the day.

On Nov 27, 2021, at 9:50 AM, Matt Rossman <sweakyboot@gmail.com> wrote:

I can set up on Saturday after 12. What are the hours that we can set up?

I’ll most likely be there shortly after 8 on Sunday as well.

Matt





Re: Train Show

Matt Rossman
 

I can set up on Saturday after 12. What are the hours that we can set up?

I’ll most likely be there shortly after 8 on Sunday as well.

Matt


Re: Train Show

Doug Dederick
 

ok thanks Mark

On Nov 26, 2021, at 1:03 PM, Mark Fleischhauer via groups.io <KramF=aol.com@groups.io> wrote:

Hi Doug,
I cannot set up on Saturday, much as I’d like to. I’m too far away.
I plan to be at the show between 7 and 8 am on Sunday. I’ll bring everything needed to connect the module I’m bringing.
Mark


Sent from the all new AOL app for iOS


On Friday, November 26, 2021, 12:51 PM, Doug Dederick <ddederic@nycap.rr.com> wrote:

Hi Everyone I hope you all had a most fulfilling Thanksgiving! Ha Ha I know I did what I always do, eat to much! Anyways we have just one week before the GTE show and as show coordinator I would like to have a game plan.

1) Who plans to set up on Saturday? If we could get the layout all set up on Saturday that would be awesome but I know a few of you live more that an hour away.
(A ) Give me a time that you can be there and if we can all be there around the same time that would be great. I can be there at anytime

2) Matt is in charge of setting up the DCC system

3) EVERYONE must work on putting in the connecting track sections before you start laying things out on your modules such as buildings and things.


CLAMPS Make sure you have them and spares if you can bring them!


In preparation please check your modules for any loose connections or broken track or another problems.

Once I get a head count for a Saturday set up I will send out more information.

Thanks Doug













Re: Train Show

Mark Fleischhauer
 

Hi Doug,
I cannot set up on Saturday, much as I’d like to. I’m too far away. 
I plan to be at the show between 7 and 8 am on Sunday. I’ll bring everything needed to connect the module I’m bringing. 
Mark


Sent from the all new AOL app for iOS

On Friday, November 26, 2021, 12:51 PM, Doug Dederick <ddederic@nycap.rr.com> wrote:

Hi Everyone I hope you all had a most fulfilling Thanksgiving! Ha Ha I know I did what I always do, eat to much! Anyways we have just one week before the GTE show and as show coordinator I would like to have a game plan.

1) Who plans to set up on Saturday? If we could get the layout all set up on Saturday that would be awesome but I know a few of you live more that an hour away.
    (A ) Give me a time that you can be there and if we can all be there around the same time that would be great. I can be there at anytime

2) Matt is in charge of setting up the DCC system

3) EVERYONE must work on putting in the connecting track sections before you start laying things out on your modules such as buildings and things.


CLAMPS  Make sure you have them and spares if you can bring them!


In preparation please check your modules for any loose connections or broken track or another problems.

Once I get a head count for a Saturday set up I will send out more information.

Thanks Doug


Train Show

Doug Dederick
 

Hi Everyone I hope you all had a most fulfilling Thanksgiving! Ha Ha I know I did what I always do, eat to much! Anyways we have just one week before the GTE show and as show coordinator I would like to have a game plan.

1) Who plans to set up on Saturday? If we could get the layout all set up on Saturday that would be awesome but I know a few of you live more that an hour away.
(A ) Give me a time that you can be there and if we can all be there around the same time that would be great. I can be there at anytime

2) Matt is in charge of setting up the DCC system

3) EVERYONE must work on putting in the connecting track sections before you start laying things out on your modules such as buildings and things.


CLAMPS Make sure you have them and spares if you can bring them!


In preparation please check your modules for any loose connections or broken track or another problems.

Once I get a head count for a Saturday set up I will send out more information.

Thanks Doug


Re: Happy Thanksgiving

Michael Romanowski
 

Happy Thanksgiving to you too Doug!
Michael Romanowski
Vice President
Upstate Model Railroaders
www.upstatemodelrailroaders.com
518-423-7519

On Nov 23, 2021, at 12:14 PM, Doug Dederick <ddederic@nycap.rr.com> wrote:

Happy Thanksgiving everyone. I will be sending out emails after the holidays to make sure we are all on the same page for setting up and running trains at the GTE show on Dec 5th

Thanks Doug





Happy Thanksgiving

Doug Dederick
 

Happy Thanksgiving everyone. I will be sending out emails after the holidays to make sure we are all on the same page for setting up and running trains at the GTE show on Dec 5th

Thanks Doug


Re: Upstate Model Railroaders at the south glens falls holiday parade

Michael Romanowski
 

Thanks
Michael Romanowski
Vice President
Upstate Model Railroaders
www.upstatemodelrailroaders.com
518-423-7519

On Nov 22, 2021, at 4:40 PM, Doug Dederick <ddederic@nycap.rr.com> wrote:

awesome

On Nov 22, 2021, at 4:34 PM, Michael Romanowski <mmroman@roadrunner.com> wrote:

Our G scale layout Christmas trailer at the holiday parade yesterday




Michael Romanowski
Vice President
Upstate Model Railroaders
www.upstatemodelrailroaders.com
518-423-7519







<IMG_3152.jpeg><IMG_3158.jpeg><IMG_3161.jpeg><IMG_3162.jpeg><IMG_3165.jpeg><IMG_3167.jpeg><smime.p7s>





Re: Upstate Model Railroaders at the south glens falls holiday parade

Doug Dederick
 

awesome

On Nov 22, 2021, at 4:34 PM, Michael Romanowski <mmroman@roadrunner.com> wrote:

Our G scale layout Christmas trailer at the holiday parade yesterday




Michael Romanowski
Vice President
Upstate Model Railroaders
www.upstatemodelrailroaders.com
518-423-7519







<IMG_3152.jpeg><IMG_3158.jpeg><IMG_3161.jpeg><IMG_3162.jpeg><IMG_3165.jpeg><IMG_3167.jpeg><smime.p7s>


Upstate Model Railroaders at the south glens falls holiday parade

Michael Romanowski
 

Our G scale layout Christmas trailer at the holiday parade yesterday




Michael Romanowski
Vice President
Upstate Model Railroaders
www.upstatemodelrailroaders.com
518-423-7519


Re: PCC show wrapup

Brian Hilgenberg
 

I watched at 11, and nothing about the show; there was no 6 broadcast because of football.
Brian

On Sunday, November 21, 2021, 05:47:10 PM EST, Geoff Dunn via groups.io <geoffdunnsoccer=yahoo.com@groups.io> wrote:

John Henry, your link didn't come through. Channel 10 was filming during the show. I forgot to watch last night and I don't see anything on their web site today.

Geoff
    On Sunday, November 21, 2021, 09:48:30 AM EST, nycrr8 via groups.io <nycrr8=yahoo.com@groups.io> wrote: 

When I was watching the weather on Channel 10 a couple of days ago, they had a short preview segment on the PCC Show, which they called "The Albany Train Show."  Most of the film was on the basement layout of one of the organizers, while they were promoting the train show.
Here's a link to the Channel 10 piece:
Albany Train Show: A Family Experience

|
|
|
|  |  |

|

|
|
|  |
Albany Train Show: A Family Experience

Planes, trains and automobiles, it’s time to get the engines started. The Albany Train Show showcases the passio...
|

|

|



Glad you all had a good time.
John Henry


Re: PCC show wrapup

Geoff Dunn
 

John Henry, your link didn't come through. Channel 10 was filming during the show. I forgot to watch last night and I don't see anything on their web site today.

Geoff

On Sunday, November 21, 2021, 09:48:30 AM EST, nycrr8 via groups.io <nycrr8=yahoo.com@groups.io> wrote:

When I was watching the weather on Channel 10 a couple of days ago, they had a short preview segment on the PCC Show, which they called "The Albany Train Show."  Most of the film was on the basement layout of one of the organizers, while they were promoting the train show.
Here's a link to the Channel 10 piece:
Albany Train Show: A Family Experience

|
|
|
|  |  |

|

|
|
|  |
Albany Train Show: A Family Experience

Planes, trains and automobiles, it’s time to get the engines started. The Albany Train Show showcases the passio...
|

|

|



Glad you all had a good time.
John Henry


Re: PCC show wrapup

nycrr8
 

When I was watching the weather on Channel 10 a couple of days ago, they had a short preview segment on the PCC Show, which they called "The Albany Train Show."  Most of the film was on the basement layout of one of the organizers, while they were promoting the train show.
Here's a link to the Channel 10 piece:
Albany Train Show: A Family Experience

|
|
|
| | |

|

|
|
| |
Albany Train Show: A Family Experience

Planes, trains and automobiles, it’s time to get the engines started. The Albany Train Show showcases the passio...
|

|

|



Glad you all had a good time.
John Henry


PCC show wrapup

Geoff Dunn
 

Brian, I, and Stephen from the Newburgh club set up a layout at the Polish Community Center today. The crowd might have been just a little smaller than pre-pandemic numbers, but there were still lots of kids watching things at eye level. We recognized some people from long-ago shows, but there were also excited kids who hadn't been born the last time this show was held! Trains ran well, with a couple of minor track issues and one intermittent power issue. We were out of the venue by 4:00. We had a space behind the layout where we could stay away from the crowds, and we spent most of our time at the layout, not shopping.

A few pictures will be put in the groups.io site photos folder soon.

There were flyers about some spring shows:
PCC show in Albany is 3/12/22;
Alco show in Amsterdam is 4/10/22
the NY Central Historical Society convention is at the former Desmond May 13 – 15, 2022, and there was talk about layouts at that. Nothing firm at all.

Geoff


Re: GTE

Geoff Dunn
 

For those who wish to park under the Empire State Plaza Saturday or Sunday morning, which is everyone bringing modules, the admission form is here:
https://gtealbany.com/wp-content/uploads/2021/07/Exhibitor-Entry-Form.pdf
Fax or email it to the contact listed on the form. Or face the wrath of Plaza security!

Geoff


Re: Club conner

a.leece@...
 

Hello,

I have the corner. Let me know if you need it and we can set up a time and place to get it to you.

Andy


Re: Polish Community Center show, November 20th

Stephen
 

OK Geoff. It appears that you would like me to bring two corners, two Doubles and my yard. Is that correct? What is the start and end times of the show? See you there.

Stephen Walsh
retsignalmtr@verizon.net

-----Original Message-----
From: Geoff Dunn via groups.io <geoffdunnsoccer=yahoo.com@groups.io>
To: AlbanyNTrak@groups.io
Sent: Mon, Nov 15, 2021 8:28 am
Subject: Re: [AlbanyNTrak] Polish Community Center show, November 20th

Brian Hilgenberg, Stephen Walsh from the Newburgh club, and I will be setting up a layout at the PCC show this coming Saturday.  The proposed layout diagram is attached for those who are interested.

Geoff


Re: Polish Community Center show, November 20th

Geoff Dunn
 

Brian Hilgenberg, Stephen Walsh from the Newburgh club, and I will be setting up a layout at the PCC show this coming Saturday. The proposed layout diagram is attached for those who are interested.

Geoff


Re: GTE

Mark Fleischhauer
 

Hi Doug,
John Henry has the Brian Emerson module that I will be bringing.  He reports that it has power poles.
Mark

-----Original Message-----
From: Doug Dederick <dougdederick7@gmail.com>
To: AlbanyNTrak@groups.io <AlbanyNTrak@groups.io>
Sent: Sat, Nov 13, 2021 3:38 pm
Subject: [AlbanyNTrak] GTE

Hi Guys I just want to verify what everyone has for connectors on your Modules power poles or chinch Jones. Below is the current diagram. Please get back to me asap on what you have in case I need to move things around. Also Matt you will be picking up the club DCC and supplies for Geoff Dunn correct ? Brian you are bringing your (2) two foot corners plus your 8 feet correct? Ok thanks Everyone and I will be in touch as we get closer

41 - 60 of 5407