Date   

Happy Thanksgiving

Doug Dederick
 

Happy Thanksgiving everyone. I will be sending out emails after the holidays to make sure we are all on the same page for setting up and running trains at the GTE show on Dec 5th

Thanks Doug


Re: Upstate Model Railroaders at the south glens falls holiday parade

Michael Romanowski
 

Thanks
Michael Romanowski
Vice President
Upstate Model Railroaders
www.upstatemodelrailroaders.com
518-423-7519

On Nov 22, 2021, at 4:40 PM, Doug Dederick <ddederic@...> wrote:

awesome

On Nov 22, 2021, at 4:34 PM, Michael Romanowski <mmroman@...> wrote:

Our G scale layout Christmas trailer at the holiday parade yesterday




Michael Romanowski
Vice President
Upstate Model Railroaders
www.upstatemodelrailroaders.com
518-423-7519







<IMG_3152.jpeg><IMG_3158.jpeg><IMG_3161.jpeg><IMG_3162.jpeg><IMG_3165.jpeg><IMG_3167.jpeg><smime.p7s>





Re: Upstate Model Railroaders at the south glens falls holiday parade

Doug Dederick
 

awesome

On Nov 22, 2021, at 4:34 PM, Michael Romanowski <mmroman@...> wrote:

Our G scale layout Christmas trailer at the holiday parade yesterday




Michael Romanowski
Vice President
Upstate Model Railroaders
www.upstatemodelrailroaders.com
518-423-7519







<IMG_3152.jpeg><IMG_3158.jpeg><IMG_3161.jpeg><IMG_3162.jpeg><IMG_3165.jpeg><IMG_3167.jpeg><smime.p7s>


Upstate Model Railroaders at the south glens falls holiday parade

Michael Romanowski
 

Our G scale layout Christmas trailer at the holiday parade yesterday




Michael Romanowski
Vice President
Upstate Model Railroaders
www.upstatemodelrailroaders.com
518-423-7519


Re: PCC show wrapup

Brian Hilgenberg
 

I watched at 11, and nothing about the show; there was no 6 broadcast because of football.
Brian

On Sunday, November 21, 2021, 05:47:10 PM EST, Geoff Dunn via groups.io <geoffdunnsoccer@...> wrote:

John Henry, your link didn't come through. Channel 10 was filming during the show. I forgot to watch last night and I don't see anything on their web site today.

Geoff
    On Sunday, November 21, 2021, 09:48:30 AM EST, nycrr8 via groups.io <nycrr8@...> wrote: 

When I was watching the weather on Channel 10 a couple of days ago, they had a short preview segment on the PCC Show, which they called "The Albany Train Show."  Most of the film was on the basement layout of one of the organizers, while they were promoting the train show.
Here's a link to the Channel 10 piece:
Albany Train Show: A Family Experience

|
|
|
|  |  |

|

|
|
|  |
Albany Train Show: A Family Experience

Planes, trains and automobiles, it’s time to get the engines started. The Albany Train Show showcases the passio...
|

|

|



Glad you all had a good time.
John Henry


Re: PCC show wrapup

Geoff Dunn
 

John Henry, your link didn't come through. Channel 10 was filming during the show. I forgot to watch last night and I don't see anything on their web site today.

Geoff

On Sunday, November 21, 2021, 09:48:30 AM EST, nycrr8 via groups.io <nycrr8@...> wrote:

When I was watching the weather on Channel 10 a couple of days ago, they had a short preview segment on the PCC Show, which they called "The Albany Train Show."  Most of the film was on the basement layout of one of the organizers, while they were promoting the train show.
Here's a link to the Channel 10 piece:
Albany Train Show: A Family Experience

|
|
|
|  |  |

|

|
|
|  |
Albany Train Show: A Family Experience

Planes, trains and automobiles, it’s time to get the engines started. The Albany Train Show showcases the passio...
|

|

|



Glad you all had a good time.
John Henry


Re: PCC show wrapup

nycrr8
 

When I was watching the weather on Channel 10 a couple of days ago, they had a short preview segment on the PCC Show, which they called "The Albany Train Show."  Most of the film was on the basement layout of one of the organizers, while they were promoting the train show.
Here's a link to the Channel 10 piece:
Albany Train Show: A Family Experience

|
|
|
| | |

|

|
|
| |
Albany Train Show: A Family Experience

Planes, trains and automobiles, it’s time to get the engines started. The Albany Train Show showcases the passio...
|

|

|



Glad you all had a good time.
John Henry


PCC show wrapup

Geoff Dunn
 

Brian, I, and Stephen from the Newburgh club set up a layout at the Polish Community Center today. The crowd might have been just a little smaller than pre-pandemic numbers, but there were still lots of kids watching things at eye level. We recognized some people from long-ago shows, but there were also excited kids who hadn't been born the last time this show was held! Trains ran well, with a couple of minor track issues and one intermittent power issue. We were out of the venue by 4:00. We had a space behind the layout where we could stay away from the crowds, and we spent most of our time at the layout, not shopping.

A few pictures will be put in the groups.io site photos folder soon.

There were flyers about some spring shows:
PCC show in Albany is 3/12/22;
Alco show in Amsterdam is 4/10/22
the NY Central Historical Society convention is at the former Desmond May 13 – 15, 2022, and there was talk about layouts at that. Nothing firm at all.

Geoff


Re: GTE

Geoff Dunn
 

For those who wish to park under the Empire State Plaza Saturday or Sunday morning, which is everyone bringing modules, the admission form is here:
https://gtealbany.com/wp-content/uploads/2021/07/Exhibitor-Entry-Form.pdf
Fax or email it to the contact listed on the form. Or face the wrath of Plaza security!

Geoff


Re: Club conner

a.leece@...
 

Hello,

I have the corner. Let me know if you need it and we can set up a time and place to get it to you.

Andy


Re: Polish Community Center show, November 20th

Stephen
 

OK Geoff. It appears that you would like me to bring two corners, two Doubles and my yard. Is that correct? What is the start and end times of the show? See you there.

Stephen Walsh
retsignalmtr@...

-----Original Message-----
From: Geoff Dunn via groups.io <geoffdunnsoccer@...>
To: AlbanyNTrak@groups.io
Sent: Mon, Nov 15, 2021 8:28 am
Subject: Re: [AlbanyNTrak] Polish Community Center show, November 20th

Brian Hilgenberg, Stephen Walsh from the Newburgh club, and I will be setting up a layout at the PCC show this coming Saturday.  The proposed layout diagram is attached for those who are interested.

Geoff


Re: Polish Community Center show, November 20th

Geoff Dunn
 

Brian Hilgenberg, Stephen Walsh from the Newburgh club, and I will be setting up a layout at the PCC show this coming Saturday. The proposed layout diagram is attached for those who are interested.

Geoff


Re: GTE

Mark Fleischhauer
 

Hi Doug,
John Henry has the Brian Emerson module that I will be bringing.  He reports that it has power poles.
Mark

-----Original Message-----
From: Doug Dederick <dougdederick7@...>
To: AlbanyNTrak@groups.io <AlbanyNTrak@groups.io>
Sent: Sat, Nov 13, 2021 3:38 pm
Subject: [AlbanyNTrak] GTE

Hi Guys I just want to verify what everyone has for connectors on your Modules power poles or chinch Jones. Below is the current diagram. Please get back to me asap on what you have in case I need to move things around. Also Matt you will be picking up the club DCC and supplies for Geoff Dunn correct ? Brian you are bringing your (2) two foot corners plus your 8 feet correct? Ok thanks Everyone and I will be in touch as we get closer


Re: GTE

Matt Rossman
 

I am running power poles.

I will be picking up the club DCC stuff from Geoff.

Matt


Club conner

Doug Dederick
 

Does anyone have the other 3 foot club corner ? I have one but there is another one out there somewhere. Please respond if you have it or you know who has it.

Thanks Doug


Re: GTE

Brian Hilgenberg
 

I,ve got Cinch connectors, with adapters for Powerpoles.
Brian

On Saturday, November 13, 2021, 03:38:46 PM EST, Doug Dederick <dougdederick7@...> wrote:

Hi Guys I just want to verify what everyone has for connectors on your Modules power poles or chinch Jones. Below is the current diagram. Please get back to me asap on what you have in case I need to move things around. Also Matt you will be picking up the club DCC and supplies for Geoff Dunn correct ? Brian you are bringing your (2) two foot corners plus your 8 feet correct? Ok thanks Everyone and I will be in touch as we get closer


Re: GTE

Neil Lynch
 

I got cinch but also jumpers

On Nov 13, 2021, at 3:38 PM, Doug Dederick <dougdederick7@...> wrote:

***NOTICE*** This came from an external source. Use caution when replying, clicking links, or opening attachments.

Hi Guys I just want to verify what everyone has for connectors on your Modules power poles or chinch Jones. Below is the current diagram. Please get back to me asap on what you have in case I need to move things around. Also Matt you will be picking up the club DCC and supplies for Geoff Dunn correct ? Brian you are bringing your (2) two foot corners plus your 8 feet correct? Ok thanks Everyone and I will be in touch as we get closer





<layout GTE.pdf>


GTE

Doug Dederick
 

Hi Guys I just want to verify what everyone has for connectors on your Modules power poles or chinch Jones. Below is the current diagram. Please get back to me asap on what you have in case I need to move things around. Also Matt you will be picking up the club DCC and supplies for Geoff Dunn correct ? Brian you are bringing your (2) two foot corners plus your 8 feet correct? Ok thanks Everyone and I will be in touch as we get closer


Set up

Doug Dederick
 

Here is the new diagram

Thanks


Re: Polish Community Center show, November 20th

Mark Fleischhauer
 

Hi Geoff,
I don't think I'll be able to participate.
Mark

-----Original Message-----
From: Geoff Dunn via groups.io <geoffdunnsoccer@...>
To: AlbanyNTrak@groups.io
Sent: Sun, Oct 31, 2021 9:34 pm
Subject: Re: [AlbanyNTrak] Polish Community Center show, November 20th

Nobody has responded saying they'd like to set up at the PCC show.  I know some of you are avoiding crowds and that's fine.  Is anyone interested in setting up at this show?

Geoff

101 - 120 of 5460