Date   

Re: GTE

Matt Rossman
 

I am running power poles.

I will be picking up the club DCC stuff from Geoff.

Matt


Club conner

Doug Dederick
 

Does anyone have the other 3 foot club corner ? I have one but there is another one out there somewhere. Please respond if you have it or you know who has it.

Thanks Doug


Re: GTE

Brian Hilgenberg
 

I,ve got Cinch connectors, with adapters for Powerpoles.
Brian

On Saturday, November 13, 2021, 03:38:46 PM EST, Doug Dederick <dougdederick7@...> wrote:

Hi Guys I just want to verify what everyone has for connectors on your Modules power poles or chinch Jones. Below is the current diagram. Please get back to me asap on what you have in case I need to move things around. Also Matt you will be picking up the club DCC and supplies for Geoff Dunn correct ? Brian you are bringing your (2) two foot corners plus your 8 feet correct? Ok thanks Everyone and I will be in touch as we get closer


Re: GTE

Neil Lynch
 

I got cinch but also jumpers

On Nov 13, 2021, at 3:38 PM, Doug Dederick <dougdederick7@...> wrote:

***NOTICE*** This came from an external source. Use caution when replying, clicking links, or opening attachments.

Hi Guys I just want to verify what everyone has for connectors on your Modules power poles or chinch Jones. Below is the current diagram. Please get back to me asap on what you have in case I need to move things around. Also Matt you will be picking up the club DCC and supplies for Geoff Dunn correct ? Brian you are bringing your (2) two foot corners plus your 8 feet correct? Ok thanks Everyone and I will be in touch as we get closer





<layout GTE.pdf>


GTE

Doug Dederick
 

Hi Guys I just want to verify what everyone has for connectors on your Modules power poles or chinch Jones. Below is the current diagram. Please get back to me asap on what you have in case I need to move things around. Also Matt you will be picking up the club DCC and supplies for Geoff Dunn correct ? Brian you are bringing your (2) two foot corners plus your 8 feet correct? Ok thanks Everyone and I will be in touch as we get closer


Set up

Doug Dederick
 

Here is the new diagram

Thanks


Re: Polish Community Center show, November 20th

Mark Fleischhauer
 

Hi Geoff,
I don't think I'll be able to participate.
Mark

-----Original Message-----
From: Geoff Dunn via groups.io <geoffdunnsoccer@...>
To: AlbanyNTrak@groups.io
Sent: Sun, Oct 31, 2021 9:34 pm
Subject: Re: [AlbanyNTrak] Polish Community Center show, November 20th

Nobody has responded saying they'd like to set up at the PCC show.  I know some of you are avoiding crowds and that's fine.  Is anyone interested in setting up at this show?

Geoff


Re: Polish Community Center show, November 20th

Michael Romanowski
 

The Upstate Model Railroaders will not be going either.

Michael Romanowski
Vice President
Upstate Model Railroaders
518 423 7519

On Nov 1, 2021, at 7:32 AM, Doug Dederick <dougdederick7@...> wrote:

Hi Geoff sorry I am not

Doug

On Oct 31, 2021, at 9:34 PM, Geoff Dunn via groups.io <geoffdunnsoccer@...> wrote:

Nobody has responded saying they'd like to set up at the PCC show. I know some of you are avoiding crowds and that's fine. Is anyone interested in setting up at this show?

Geoff









Re: Polish Community Center show, November 20th

Doug Dederick
 

Hi Geoff sorry I am not

Doug

On Oct 31, 2021, at 9:34 PM, Geoff Dunn via groups.io <geoffdunnsoccer@...> wrote:

Nobody has responded saying they'd like to set up at the PCC show. I know some of you are avoiding crowds and that's fine. Is anyone interested in setting up at this show?

Geoff





Re: Polish Community Center show, November 20th

Matt Rossman
 

I am out for that weekend, prior obligations.

Thank you though.

Matt


Re: Polish Community Center show, November 20th

Geoff Dunn
 

Nobody has responded saying they'd like to set up at the PCC show. I know some of you are avoiding crowds and that's fine. Is anyone interested in setting up at this show?

Geoff


GTE

Doug Dederick
 

Ok here is what we have for a set up


Re: Polish Community Center show, November 20th

Geoff Dunn
 

The PCC show is November 20, from 9:00 until 3:00

Geoff

On Tuesday, October 26, 2021, 01:27:20 PM EDT, Mark Fleischhauer via groups.io <kramf@...> wrote:

Geoff,
When is the show?
Thanks. 
Mark


Sent from the all new AOL app for iOS


On Tuesday, October 26, 2021, 10:57 AM, Geoff Dunn via groups.io <geoffdunnsoccer@...> wrote:

The organizer of the PCC show assures me that the show is on, although their web site doesn't reflect it.  But let's assume it's on.  Who wants to attend?  This has been a TTrak layout for the last several years.  We usually take up 10' X 16', so it could be N-Trak if people preferred.  What's the interest level?

No matter what modules we bring, I will design the layout so we have some separation between the crowd and us.  Too many unvaxed kids!

Geoff


Re: Polish Community Center show, November 20th

Mark Fleischhauer
 

Geoff,
When is the show?
Thanks. 
Mark


Sent from the all new AOL app for iOS

On Tuesday, October 26, 2021, 10:57 AM, Geoff Dunn via groups.io <geoffdunnsoccer@...> wrote:

The organizer of the PCC show assures me that the show is on, although their web site doesn't reflect it.  But let's assume it's on.  Who wants to attend?  This has been a TTrak layout for the last several years.  We usually take up 10' X 16', so it could be N-Trak if people preferred.  What's the interest level?

No matter what modules we bring, I will design the layout so we have some separation between the crowd and us.  Too many unvaxed kids!

Geoff


Polish Community Center show, November 20th

Geoff Dunn
 

The organizer of the PCC show assures me that the show is on, although their web site doesn't reflect it. But let's assume it's on. Who wants to attend? This has been a TTrak layout for the last several years. We usually take up 10' X 16', so it could be N-Trak if people preferred. What's the interest level?

No matter what modules we bring, I will design the layout so we have some separation between the crowd and us. Too many unvaxed kids!

Geoff


Re: GTE show

Doug Dederick
 

ok thanks

On Oct 25, 2021, at 3:50 PM, Matt Rossman <sweakyboot@...> wrote:

I have 2 5’ modules, I have to keep them together as a pair because of the wiring.

Matt





Re: GTE show

Matt Rossman
 

I have 2 5’ modules, I have to keep them together as a pair because of the wiring.

Matt


Re: GTE show

Doug Dederick
 

Ok thanks I will have to plan around with a design. Brian I take it that yours needs to stay together as well ? Matt what about your 10 foot section. Please tell me how many modules it is and how big they are and if they can be separated?

Thanks

On Oct 25, 2021, at 1:30 PM, Neil Lynch via groups.io <neil.lynch@...> wrote:

The coal mine module. 4 track plus mtn.

It's 2 3 footers bolted together.

-----Original Message-----
From: AlbanyNTrak@groups.io <AlbanyNTrak@groups.io> On Behalf Of Doug Dederick
Sent: Monday, October 25, 2021 12:47 PM
To: AlbanyNTrak@groups.io
Subject: Re: [AlbanyNTrak] GTE show

***NOTICE*** This came from an external source. Use caution when replying, clicking links, or opening attachments.

You are bringing 6 feet ? If so what are they or is it one module 6 feet long?

On Oct 25, 2021, at 12:44 PM, Neil Lynch via groups.io <neil.lynch@...> wrote:

6 footer

-----Original Message-----
From: AlbanyNTrak@groups.io <AlbanyNTrak@groups.io> On Behalf Of Doug Dederick
Sent: Monday, October 25, 2021 12:43 PM
To: AlbanyNTrak@groups.io
Subject: [AlbanyNTrak] GTE show

***NOTICE*** This came from an external source. Use caution when replying, clicking links, or opening attachments.

Hi Guys Here is what we have as of today:

Mark 1 4 footer
Brian 1 8 foot 2 2ft corners
Me 1 4 footer
Matt 1 10 footer
Neil ?

Geoff 2 3 footers

To make this work we need another 2 FT section to equal 10 feet on both sides. What is the duck under and who has it ?


Here is what we have so far as far as a Diagram




















Re: GTE show

Neil Lynch
 

The coal mine module. 4 track plus mtn.

It's 2 3 footers bolted together.

-----Original Message-----
From: AlbanyNTrak@groups.io <AlbanyNTrak@groups.io> On Behalf Of Doug Dederick
Sent: Monday, October 25, 2021 12:47 PM
To: AlbanyNTrak@groups.io
Subject: Re: [AlbanyNTrak] GTE show

***NOTICE*** This came from an external source. Use caution when replying, clicking links, or opening attachments.

You are bringing 6 feet ? If so what are they or is it one module 6 feet long?

On Oct 25, 2021, at 12:44 PM, Neil Lynch via groups.io <neil.lynch@...> wrote:

6 footer

-----Original Message-----
From: AlbanyNTrak@groups.io <AlbanyNTrak@groups.io> On Behalf Of Doug Dederick
Sent: Monday, October 25, 2021 12:43 PM
To: AlbanyNTrak@groups.io
Subject: [AlbanyNTrak] GTE show

***NOTICE*** This came from an external source. Use caution when replying, clicking links, or opening attachments.

Hi Guys Here is what we have as of today:

Mark 1 4 footer
Brian 1 8 foot 2 2ft corners
Me 1 4 footer
Matt 1 10 footer
Neil ?

Geoff 2 3 footers

To make this work we need another 2 FT section to equal 10 feet on both sides. What is the duck under and who has it ?


Here is what we have so far as far as a Diagram











Re: GTE show

Doug Dederick
 

You are bringing 6 feet ? If so what are they or is it one module 6 feet long?

On Oct 25, 2021, at 12:44 PM, Neil Lynch via groups.io <neil.lynch@...> wrote:

6 footer

-----Original Message-----
From: AlbanyNTrak@groups.io <AlbanyNTrak@groups.io> On Behalf Of Doug Dederick
Sent: Monday, October 25, 2021 12:43 PM
To: AlbanyNTrak@groups.io
Subject: [AlbanyNTrak] GTE show

***NOTICE*** This came from an external source. Use caution when replying, clicking links, or opening attachments.

Hi Guys Here is what we have as of today:

Mark 1 4 footer
Brian 1 8 foot 2 2ft corners
Me 1 4 footer
Matt 1 10 footer
Neil ?

Geoff 2 3 footers

To make this work we need another 2 FT section to equal 10 feet on both sides. What is the duck under and who has it ?


Here is what we have so far as far as a Diagram










141 - 160 of 5487