Date   

Re: Call for modules - PCC show, March 10th

Geoff Dunn
 

I haven't heard from Brian about his status for Saturday. Below are two plans, one with Brian and one without. Comments and suggestions are welcome, as always.

Geoff


Without Brian, one table will be half empty. We can put out information sheets or something...




---In AlbanyNTRAK@..., <geoffdunnsoccer@...> wrote :

So far, we have Rod, Dave, Mike Richards, myself, and possibly Brian bringing modules to the PCC show this Saturday. We have room for more modules if anyone else is interested. Setup is 7:30 or so; the show goes from 9:00 until 3:00.

Rod, you're bringing less than sometimes. Do you want to bring more? Up to you, of course.

Geoff


---In AlbanyNTRAK@..., <geoffdunnsoccer@...> wrote :

The semi-annual Polish Community Center show is March 10th, from 9:00 until 3:00. We usually display a T-Trak layout. Who would like to bring modules? We have our usual limited space, I assume (I'll confirm that before the show).

Geoff


Re: ALCO/Amsterdam Show

Dave Sefcik
 

Thanks Rod. I've sent you a direct message with more info.

Dave

On Mon, Mar 5, 2018 at 2:21 PM, 'Roderick W. Mason' rmason1@... [AlbanyNTRAK] <AlbanyNTRAK@...> wrote:
 

Dave,

 

I would be willing to be the coordinator for the Alco/Amsterdam Show on April 8th.  However, since I haven’t coordinated a show before, I’ll need some guidance on what’s required of the coordinator.

 

Regarding my preference between Ttrak and Ntrak, I vote for Ttrak.  If it’s Ttrak, I would be bringing 7-10 modules depending on what’s needed. 

 

Please let me know what needs to be done prior to March 14th if the club decides that we’re participating.  Thanks.

 

Rod

 


From: AlbanyNTRAK@... [mailto:AlbanyNTRAK@yahoogroups.com]
Sent: Monday, March 05, 2018 10:38 AM
To: AlbanyNTRAK@...
Subject: [AlbanyNTRAK] ALCO/Amsterdam Show

 

 

The club is need of a coordinator for the above show. The show date is April 8. The deadline for letting the organizers know we would attend is March 14. Last year we had a great Ttrak layout and I'd like to see the club do that again this year. 

 

A few  questions 

     

     - Is their a volunteer to coordinate?



     - Ttrak or Ntrak?



     - Who will attend and bring modules?



Thanks,

 

Dave




--
Dave Sefcik
Broker Associate
Piretti Real Estate
22 Walker Street
Lenox MA 01240
413-822-8525 (cell)
413-637-1696 (offfice)

"E-mails sent or received shall neither constitute acceptance of conducting transactions via electronic means nor create a binding contract until and unless a written contract is signed by the parties."


Re: ALCO/Amsterdam Show

Rod Mason
 

Dave,

 

I would be willing to be the coordinator for the Alco/Amsterdam Show on April 8th.  However, since I haven’t coordinated a show before, I’ll need some guidance on what’s required of the coordinator.

 

Regarding my preference between Ttrak and Ntrak, I vote for Ttrak.  If it’s Ttrak, I would be bringing 7-10 modules depending on what’s needed. 

 

Please let me know what needs to be done prior to March 14th if the club decides that we’re participating.  Thanks.

 

Rod

 


From: AlbanyNTRAK@... [mailto:AlbanyNTRAK@...]
Sent: Monday, March 05, 2018 10:38 AM
To: AlbanyNTRAK@...
Subject: [AlbanyNTRAK] ALCO/Amsterdam Show

 

 

The club is need of a coordinator for the above show. The show date is April 8. The deadline for letting the organizers know we would attend is March 14. Last year we had a great Ttrak layout and I'd like to see the club do that again this year. 

 

A few  questions 

     

     - Is their a volunteer to coordinate?



     - Ttrak or Ntrak?



     - Who will attend and bring modules?



Thanks,

 

Dave


Re: Call for modules - PCC show, March 10th

Rod Mason
 

Geoff,

 

I’d prefer to stick to the 7 modules that I previously indicated that I would be bringing (i.e. 1 double-wide, 2 singles, 3 outside corners & 1 inside corner).  However, I could bring 1 other double-wide and a couple of more singles if you needed them to fill-in the layout.

 

Rod

 


From: AlbanyNTRAK@... [mailto:AlbanyNTRAK@...]
Sent: Monday, March 05, 2018 10:02 AM
To: AlbanyNTRAK@...
Subject: [AlbanyNTRAK] Re: Call for modules - PCC show, March 10th

 

 

So far, we have Rod, Dave, Mike Richards, myself, and possibly Brian bringing modules to the PCC show this Saturday.  We have room for more modules if anyone else is interested.  Setup is 7:30 or so; the show goes from 9:00 until 3:00.

Rod, you're bringing less than sometimes.  Do you want to bring more?  Up to you, of course.

Geoff



---In AlbanyNTRAK@..., wrote :

The semi-annual Polish Community Center show is March 10th, from 9:00 until 3:00.  We usually display a T-Trak layout.  Who would like to bring modules?  We have our usual limited space, I assume (I'll confirm that before the show).

Geoff

 


Re: ALCO/Amsterdam Show

Michael Richards
 

I vote for Ttrak and would attend with my (2) double length modules.


On Mon, Mar 5, 2018 at 10:40 AM lenoxrealtor@... [AlbanyNTRAK] <AlbanyNTRAK@...> wrote:
 

The club is need of a coordinator for the above show. The show date is April 8. The deadline for letting the organizers know we would attend is March 14. Last year we had a great Ttrak layout and I'd like to see the club do that again this year. 


A few  questions 

     

     - Is their a volunteer to coordinate?


     - Ttrak or Ntrak?


     - Who will attend and bring modules?


Thanks,


Dave


Re: ALCO/Amsterdam Show

Mark Fleischhauer
 

I'm interested in attending.  I'll have to double check my calendar.


-----Original Message-----
From: lenoxrealtor@... [AlbanyNTRAK]
To: AlbanyNTRAK
Sent: Mon, Mar 5, 2018 10:50 am
Subject: [AlbanyNTRAK] ALCO/Amsterdam Show

 
The club is need of a coordinator for the above show. The show date is April 8. The deadline for letting the organizers know we would attend is March 14. Last year we had a great Ttrak layout and I'd like to see the club do that again this year. 

A few  questions 
     
     - Is their a volunteer to coordinate?

     - Ttrak or Ntrak?

     - Who will attend and bring modules?

Thanks,

Dave


Re: ALCO/Amsterdam Show

Forest Bevins
 

T-trak and i'll be there


ALCO/Amsterdam Show

Dave Sefcik
 

The club is need of a coordinator for the above show. The show date is April 8. The deadline for letting the organizers know we would attend is March 14. Last year we had a great Ttrak layout and I'd like to see the club do that again this year. 


A few  questions 

     

     - Is their a volunteer to coordinate?


     - Ttrak or Ntrak?


     - Who will attend and bring modules?


Thanks,


Dave


Re: Call for modules - PCC show, March 10th

Geoff Dunn
 

So far, we have Rod, Dave, Mike Richards, myself, and possibly Brian bringing modules to the PCC show this Saturday.  We have room for more modules if anyone else is interested.  Setup is 7:30 or so; the show goes from 9:00 until 3:00.

Rod, you're bringing less than sometimes.  Do you want to bring more?  Up to you, of course.

Geoff


---In AlbanyNTRAK@..., <geoffdunnsoccer@...> wrote :

The semi-annual Polish Community Center show is March 10th, from 9:00 until 3:00.  We usually display a T-Trak layout.  Who would like to bring modules?  We have our usual limited space, I assume (I'll confirm that before the show).

Geoff



Re: CGCC show wrapup

Geoff Dunn
 

A few more things on the CGCC show...
Marv Rossman (Butch's dad) was there.  He's doing well.  He reported that Matt did get married in November.  Matt was around ten when he and Butch started coming to shows...

Attendance at the show was something like 830 people.  That's within the normal range.  We will here in January if there will be a show next year.  The show organizer is or has retired from the college.

Geoff


CGCC show wrapup

Geoff Dunn
 

We had six members bring modules to today's show.  The layout was 13' X 17'.  We had two loops of DC and two loops of DCC.  There were a few minor hiccups at first but overall the layout ran well and we had fun.  Pictures are in the Yahoo Groups photos area.

Geoff



Re: CGCC show layout, draft 1

Dave Sefcik
 

Rod, I'll be happy assist you with the unloading, etc. I'm sure there'll be enough of us to lend a hand.

Dave

On Thu, Mar 1, 2018 at 1:31 PM, 'Roderick W. Mason' rmason1@... [AlbanyNTRAK] <AlbanyNTRAK@...> wrote:
 

Geoff,

 

Thanks for the congrats on the grandchild.  Karen and I haven’t been able to see much of Addison since she was born on February 5th as we’ve both been battling colds for most of February.

 

I did pick up Brian’s and Bob’s modules from Rik this morning.  I can handle Bob’s lift bridge by myself on Sunday but I’m going to need help with unloading, setting-up and reloading Brian’s module as it’s too heavy for me to handle by myself.  I’ll try to get to the college as early as possible on Sunday to facilitate getting it unloaded and set-up by the 10 am start time.

 

Rod

 


From: AlbanyNTRAK@... [mailto:AlbanyNTRAK@yahoogroups.com]
Sent: Wednesday, February 28, 2018 1:09 PM
To: AlbanyNTRAK@...
Subject: RE: [AlbanyNTRAK] CGCC show layout, draft 1

 

 

Rod, congratulations on your grandchild.  I hear they're lots of fun.

Bringing Brian's and Bob's modules is fine.  The diagram has the lift bridge against a 3' corner, so I think that will be ok.

I called the college just now and confirmed that the show is on for this Sunday.  See some of you then!

Geoff



---In AlbanyNTRAK@..., wrote :

Geoff,

 

I was planning on bringing Brian’s and Bob’s modules rather than my own.  I haven’t picked them up from Rik yet (it will probably be tomorrow).  Therefore,  if you think there may be an issue with clamping the lift bridge to a corner, please let me know by tomorrow and I’ll skip bringing either module and I’ll bring my own instead.  The reason I wasn’t keen on bringing my 2 modules is that I don’t have anybody to help me load-in, setup or load-out like I did at GTE the last 2 years (Rik will be away and my son is very busy—and tired, with his new born daughter).  Thanks.

 

Rod

 

From: AlbanyNTRAK@... [mailto:AlbanyNTRAK@yahoogroups.com]
Sent: Tuesday, February 27, 2018 9:07 PM
To: AlbanyNTRAK@...
Subject: [AlbanyNTRAK] CGCC show layout, draft 1

 

 

Attached is a proposed layout plan for the CGCC show.  Rod, are you bringing Brian's and Bob's modules, or your own?  Mike, the module with your name on it is the duckunder.  Please let me know if anyone sees any errors or problems with this (besides having the duckunder next to the 2' corner - we'll clamp it tightly).  If anyone wants to bring modules at the last minute, let me know and we can work you in.  The doors open at 7:00 for setup; the show runs from 10:00 until 3:00.  They typically have the best food of any show we attend.  Geoff

 




--
Dave Sefcik
Broker Associate
Piretti Real Estate
22 Walker Street
Lenox MA 01240
413-822-8525 (cell)
413-637-1696 (offfice)

"E-mails sent or received shall neither constitute acceptance of conducting transactions via electronic means nor create a binding contract until and unless a written contract is signed by the parties."


Re: CGCC show layout, draft 1

Rod Mason
 

Geoff,

 

Thanks for the congrats on the grandchild.  Karen and I haven’t been able to see much of Addison since she was born on February 5th as we’ve both been battling colds for most of February.

 

I did pick up Brian’s and Bob’s modules from Rik this morning.  I can handle Bob’s lift bridge by myself on Sunday but I’m going to need help with unloading, setting-up and reloading Brian’s module as it’s too heavy for me to handle by myself.  I’ll try to get to the college as early as possible on Sunday to facilitate getting it unloaded and set-up by the 10 am start time.

 

Rod

 


From: AlbanyNTRAK@... [mailto:AlbanyNTRAK@...]
Sent: Wednesday, February 28, 2018 1:09 PM
To: AlbanyNTRAK@...
Subject: RE: [AlbanyNTRAK] CGCC show layout, draft 1

 

 

Rod, congratulations on your grandchild.  I hear they're lots of fun.

Bringing Brian's and Bob's modules is fine.  The diagram has the lift bridge against a 3' corner, so I think that will be ok.

I called the college just now and confirmed that the show is on for this Sunday.  See some of you then!

Geoff



---In AlbanyNTRAK@..., wrote :

Geoff,

 

I was planning on bringing Brian’s and Bob’s modules rather than my own.  I haven’t picked them up from Rik yet (it will probably be tomorrow).  Therefore,  if you think there may be an issue with clamping the lift bridge to a corner, please let me know by tomorrow and I’ll skip bringing either module and I’ll bring my own instead.  The reason I wasn’t keen on bringing my 2 modules is that I don’t have anybody to help me load-in, setup or load-out like I did at GTE the last 2 years (Rik will be away and my son is very busy—and tired, with his new born daughter).  Thanks.

 

Rod

 

From: AlbanyNTRAK@... [mailto:AlbanyNTRAK@...]
Sent: Tuesday, February 27, 2018 9:07 PM
To: AlbanyNTRAK@...
Subject: [AlbanyNTRAK] CGCC show layout, draft 1

 

 

Attached is a proposed layout plan for the CGCC show.  Rod, are you bringing Brian's and Bob's modules, or your own?  Mike, the module with your name on it is the duckunder.  Please let me know if anyone sees any errors or problems with this (besides having the duckunder next to the 2' corner - we'll clamp it tightly).  If anyone wants to bring modules at the last minute, let me know and we can work you in.  The doors open at 7:00 for setup; the show runs from 10:00 until 3:00.  They typically have the best food of any show we attend.  Geoff

 


Re: CGCC show layout, draft 1

Geoff Dunn
 

Rod, congratulations on your grandchild.  I hear they're lots of fun.

Bringing Brian's and Bob's modules is fine.  The diagram has the lift bridge against a 3' corner, so I think that will be ok.

I called the college just now and confirmed that the show is on for this Sunday.  See some of you then!

Geoff


---In AlbanyNTRAK@..., <rmason1@...> wrote :

Geoff,

 

I was planning on bringing Brian’s and Bob’s modules rather than my own.  I haven’t picked them up from Rik yet (it will probably be tomorrow).  Therefore,  if you think there may be an issue with clamping the lift bridge to a corner, please let me know by tomorrow and I’ll skip bringing either module and I’ll bring my own instead.  The reason I wasn’t keen on bringing my 2 modules is that I don’t have anybody to help me load-in, setup or load-out like I did at GTE the last 2 years (Rik will be away and my son is very busy—and tired, with his new born daughter).  Thanks.

 

Rod

 

From: AlbanyNTRAK@... [mailto:AlbanyNTRAK@...]
Sent: Tuesday, February 27, 2018 9:07 PM
To: AlbanyNTRAK@...
Subject: [AlbanyNTRAK] CGCC show layout, draft 1

 

 

Attached is a proposed layout plan for the CGCC show.  Rod, are you bringing Brian's and Bob's modules, or your own?  Mike, the module with your name on it is the duckunder.  Please let me know if anyone sees any errors or problems with this (besides having the duckunder next to the 2' corner - we'll clamp it tightly).  If anyone wants to bring modules at the last minute, let me know and we can work you in.  The doors open at 7:00 for setup; the show runs from 10:00 until 3:00.  They typically have the best food of any show we attend.  Geoff

 


Re: CGCC show layout, draft 1

Rod Mason
 

Geoff,

 

I was planning on bringing Brian’s and Bob’s modules rather than my own.  I haven’t picked them up from Rik yet (it will probably be tomorrow).  Therefore,  if you think there may be an issue with clamping the lift bridge to a corner, please let me know by tomorrow and I’ll skip bringing either module and I’ll bring my own instead.  The reason I wasn’t keen on bringing my 2 modules is that I don’t have anybody to help me load-in, setup or load-out like I did at GTE the last 2 years (Rik will be away and my son is very busy—and tired, with his new born daughter).  Thanks.

 

Rod

 

From: AlbanyNTRAK@... [mailto:AlbanyNTRAK@...]
Sent: Tuesday, February 27, 2018 9:07 PM
To: AlbanyNTRAK@...
Subject: [AlbanyNTRAK] CGCC show layout, draft 1

 

 

Attached is a proposed layout plan for the CGCC show.  Rod, are you bringing Brian's and Bob's modules, or your own?  Mike, the module with your name on it is the duckunder.  Please let me know if anyone sees any errors or problems with this (besides having the duckunder next to the 2' corner - we'll clamp it tightly).  If anyone wants to bring modules at the last minute, let me know and we can work you in.  The doors open at 7:00 for setup; the show runs from 10:00 until 3:00.  They typically have the best food of any show we attend.  Geoff

 


CGCC show layout, draft 1

Geoff Dunn
 

Attached is a proposed layout plan for the CGCC show.  Rod, are you bringing Brian's and Bob's modules, or your own?  Mike, the module with your name on it is the duckunder.  Please let me know if anyone sees any errors or problems with this (besides having the duckunder next to the 2' corner - we'll clamp it tightly).  If anyone wants to bring modules at the last minute, let me know and we can work you in.  The doors open at 7:00 for setup; the show runs from 10:00 until 3:00.  They typically have the best food of any show we attend.  Geoff



Re: Call for modules - PCC show, March 10th

lacasse
 

I will be in Philly that weekend, Mike L.
 

Sent: Saturday, February 24, 2018 4:28 PM
Subject: [AlbanyNTRAK] Call for modules - PCC show, March 10th
 
 

The semi-annual Polish Community Center show is March 10th, from 9:00 until 3:00.  We usually display a T-Trak layout.  Who would like to bring modules?  We have our usual limited space, I assume (I'll confirm that before the show).

Geoff



Virus-free. www.avg.com


Re: Call for modules - PCC show, March 10th

Rod Mason
 

Geoff,

 

If there’s room, I was planning on bringing my “Main Street” setup consisting of 1 outside corner, 1 double-wide module and 1 single-wide module. I can also bring 2 more outside corners to form an end cap, another single-wide module and an inside corner.  I’m attaching a couple of photos of how I have them arranged on my home T-Trak layout. 

 

Rod

 


From: AlbanyNTRAK@... [mailto:AlbanyNTRAK@...]
Sent: Saturday, February 24, 2018 4:29 PM
To: AlbanyNTRAK@...
Subject: [AlbanyNTRAK] Call for modules - PCC show, March 10th

 

 

The semi-annual Polish Community Center show is March 10th, from 9:00 until 3:00.  We usually display a T-Trak layout.  Who would like to bring modules?  We have our usual limited space, I assume (I'll confirm that before the show).

Geoff

 


Re: Misplaced Tools

Dave Sefcik
 

I was the last one off the floor at GTE. I know there was a roll of cork because not knowing who it belonged too I took it with me. I did not see any boxes and after seeing the cork I made certain there wasn't anything else. I still have the cork and have no need for it so I'll be happy to give it to anyone looking for cork. 

Dave

On Tue, Feb 27, 2018 at 3:39 PM, cindi wheeler wheeler_cindi@... [AlbanyNTRAK] <AlbanyNTRAK@...> wrote:
 

All,

 

I have been seemed to have misplaced a blue plastic pencil box containing all my track tools.

 

The box contained pliers, kobalt screwdriver set, 2 pin drills, track screws, NMRA Clearance gauge, brite boy and more.

 

I thought I brought it home from the GTE show, I know I did leave a roll of cork if anyone wanted it.

 

I don’t believe I left the box, but you never know.

 

If you have might have come across it, please let me know.

 

Much appreciated,

 

Al Wheeler





--
Dave Sefcik
Broker Associate
Piretti Real Estate
22 Walker Street
Lenox MA 01240
413-822-8525 (cell)
413-637-1696 (offfice)

"E-mails sent or received shall neither constitute acceptance of conducting transactions via electronic means nor create a binding contract until and unless a written contract is signed by the parties."


Re: Misplaced Tools

Albert Wheeler
 

All,

 

I have been seemed to have misplaced a blue plastic pencil box containing all my track tools.

 

The box contained pliers, kobalt screwdriver set, 2 pin drills, track screws, NMRA Clearance gauge, brite boy and more.

 

I thought I brought it home from the GTE show, I know I did leave a roll of cork if anyone wanted it.

 

I don’t believe I left the box, but you never know.

 

If you have might have come across it, please let me know.

 

Much appreciated,

 

Al Wheeler


901 - 920 of 5465