I am curious about something. I am only moderately familiar with APRS and have been away from it for a couple of years. I operate portable nomadic and low power all year, usually on HF. I dug out my A

Positions of stations in MultiTrack maps seems to last a day or so. How can I shorten that retain time? Is it some parameter for “friends” in the .xml file? Thanks, Arnold, KQ6DI

I have the kg-uv3d which i am trying to feed to UZ7HO soundmodem for APRSISCE display. I think my issue is setting the squelch which is menu selected. No squelch seems to let through to much backgroun

I have used my Kenwood TS-2000 with any problems, now it will not Transmit and I can hear it receive packets but does not show or transmit. I have the port enabled I heave beaconing enabled. I know th

There has been a lot of discussion about COMM port sharing. Although the best method of sharing is still KISS over IP or AGW, it is possible to build a BUS to share COMM data. I had a discussion with

When I start to bring my map down to ground level, the map pixilates. This used to work fine so I must have changed something. Anybody know how to correct this problem? Any help would be appreciated.

When I go to Configure - Ports - MyNewPort - I see the Inherit box is checked but greyed out and there is no entry in MyCall-ssid box. Is this normal? I specified this information when I first started

There is a amateur operator in the Pittsburgh Metro Area who has been beaconing every minute while mobile. He was asked to change his beacon to no less than every 3 minutes and to use smart beaconing

I gather most APRS software filters out any packets with TCPIP in the path. I suspect APRSISCE32 does too? Thing is, my igate is bidirectional for messages, and unidirectional for position packets but

Having problem when creating a chat message in APRSIS32 can’t send the message won’t key the radio. I am sure it is a setting but can’t find it even though it used to work. All help would be appreciat

For those map lovers among us, https://openwhatevermap.xyz/#3/28.00/18.00 Lynn (D) - KJ4ERJ - Author of APRSISCE for Windows Mobile and Win32

The KISS-type port provides initialization strings for a Kenwood internal TNC. Yes, I know the name is misleading, but it goes way back into ancient history. What you probably want is to lock your KPC

Hello All, I have just installed APRSISCE and intend to migrate to this from previously using Pinpoint. I understand that I will need a password to transmit via the internet. How do I go about receivi

Thank you for permitting me into this group. I have had a IGate setup for a number of years and act as a fill-in digipeater for my area south of Pittsburgh. I have recently switched software from Pinp

I talked to Pete today this is what he had to say. KB3KBR Greg. Sent from my Samsung Galaxy smartphone.

I have suddenly lost the NWS Warning feed to Igate onto RF in the local area for NWS Wakefield office (AKQ). The last warnings were received on April 26, and two days since we have experienced severe

When I try to make a new map tile config with a map that I made in Map Warper, the images that are downloaded are grey only. With some packet sniffing, I found that the requests coming back from Map W

I got this SPAM message today that has a link to an online pharmacy - how did that get into APRS Messages (upper right hand corner)? Bret/N4SRN

Is it possible to use aprsis32 with the Anytone AT-778UV and if so what cable would I need to connect the radio to my computer?

Hello , hope I can use the software soon