|
aprsisce32 and the the FT 991 7 messages
I have the aprsisce program up and running. A friend told me you have to have a sound card program in order to connect with others. I have my radio tuned to 144.390 but I am not able to transmit. I d/
I have the aprsisce program up and running. A friend told me you have to have a sound card program in order to connect with others. I have my radio tuned to 144.390 but I am not able to transmit. I d/
|
By
Robert
·
|
|
Disabled showing in Banner Under APRSIS32 3 messages
Good afternoon: I can't seem to find anything here or in the wikidot about this. I'm running APRSIS32 on a Windows 10 desktop. APRSIS32 is talking to UZ7HO's Soundmodem and displaying units that are b
Good afternoon: I can't seem to find anything here or in the wikidot about this. I'm running APRSIS32 on a Windows 10 desktop. APRSIS32 is talking to UZ7HO's Soundmodem and displaying units that are b
|
By
Carmine Prestia
·
|
|
Strange flood of digipeated packets on KD0TLS-1 I-Gate 7 messages
I'm not sure if this is an APRSIS32 issue, or a general question about the APRS network. Either way, I find it to be baffling and mysterious. My small I-Gate, KD0TLS-1, experiences a flood of digipeat
I'm not sure if this is an APRSIS32 issue, or a general question about the APRS network. Either way, I find it to be baffling and mysterious. My small I-Gate, KD0TLS-1, experiences a flood of digipeat
|
By
todd.dugdale@...
·
|
|
IGate question 11 messages
I have been reading the posts in Ref to "IGate" contained on this great site. Having said that I am still a bit lost. Here is my operating station: 1 Yaesu FTM440XGR functioning as an Igate, it works
I have been reading the posts in Ref to "IGate" contained on this great site. Having said that I am still a bit lost. Here is my operating station: 1 Yaesu FTM440XGR functioning as an Igate, it works
|
By
N5ODX
·
|
|
No transmit with MobilinkD TNC2
The set up. Windows 10 laptop with internal bluetooth disabled at the bios level. Bluetooth adapter - MSI Star Key Ver 222-BW. Yes I know it is old. Radio - using is a Yaesu VX-7R This setup worked gr
The set up. Windows 10 laptop with internal bluetooth disabled at the bios level. Bluetooth adapter - MSI Star Key Ver 222-BW. Yes I know it is old. Radio - using is a Yaesu VX-7R This setup worked gr
|
By
John Visser, VA3MSV
·
|
|
Drive D: 5 messages
Interesting... I don't have a Drive D :-) Activity:WinMain:2022-07-13T21:22:10.609 ***** PaintMainWindow:Shadow BitBlt Failed in d:\compass\code\aprs\aprsisce\aprsisce.cpp line 40062 Error 6 ...DOUG K
Interesting... I don't have a Drive D :-) Activity:WinMain:2022-07-13T21:22:10.609 ***** PaintMainWindow:Shadow BitBlt Failed in d:\compass\code\aprs\aprsisce\aprsisce.cpp line 40062 Error 6 ...DOUG K
|
By
Doug Ferrell
·
|
|
Send Message by RF? 11 messages
I am curious about something. I am only moderately familiar with APRS and have been away from it for a couple of years. I operate portable nomadic and low power all year, usually on HF. I dug out my A
I am curious about something. I am only moderately familiar with APRS and have been away from it for a couple of years. I operate portable nomadic and low power all year, usually on HF. I dug out my A
|
By
Clifford - N0LKC
·
|
|
Multitrack past positions retain time 2 messages
Positions of stations in MultiTrack maps seems to last a day or so. How can I shorten that retain time? Is it some parameter for “friends” in the .xml file? Thanks, Arnold, KQ6DI
Positions of stations in MultiTrack maps seems to last a day or so. How can I shorten that retain time? Is it some parameter for “friends” in the .xml file? Thanks, Arnold, KQ6DI
|
By
Arnold Harding - KQ6DI
·
|
|
wouxun KG-UV3d with sound card modem 3 messages
I have the kg-uv3d which i am trying to feed to UZ7HO soundmodem for APRSISCE display. I think my issue is setting the squelch which is menu selected. No squelch seems to let through to much backgroun
I have the kg-uv3d which i am trying to feed to UZ7HO soundmodem for APRSISCE display. I think my issue is setting the squelch which is menu selected. No squelch seems to let through to much backgroun
|
By
russ edelen
·
|
|
TS-2000 12 messages
I have used my Kenwood TS-2000 with any problems, now it will not Transmit and I can hear it receive packets but does not show or transmit. I have the port enabled I heave beaconing enabled. I know th
I have used my Kenwood TS-2000 with any problems, now it will not Transmit and I can hear it receive packets but does not show or transmit. I have the port enabled I heave beaconing enabled. I know th
|
By
Marvin Penepent
·
|
|
COMM port sharing 2 messages
There has been a lot of discussion about COMM port sharing. Although the best method of sharing is still KISS over IP or AGW, it is possible to build a BUS to share COMM data. I had a discussion with
There has been a lot of discussion about COMM port sharing. Although the best method of sharing is still KISS over IP or AGW, it is possible to build a BUS to share COMM data. I had a discussion with
|
By
Rob Giuliano
·
|
|
Map Pixelating 2 messages
When I start to bring my map down to ground level, the map pixilates. This used to work fine so I must have changed something. Anybody know how to correct this problem? Any help would be appreciated.
When I start to bring my map down to ground level, the map pixilates. This used to work fine so I must have changed something. Anybody know how to correct this problem? Any help would be appreciated.
|
By
Don Wolfe
·
|
|
MyCall-ssid box empty / greyed out 5 messages
When I go to Configure - Ports - MyNewPort - I see the Inherit box is checked but greyed out and there is no entry in MyCall-ssid box. Is this normal? I specified this information when I first started
When I go to Configure - Ports - MyNewPort - I see the Inherit box is checked but greyed out and there is no entry in MyCall-ssid box. Is this normal? I specified this information when I first started
|
By
AB9NN - Jon Kreski
·
|
|
Is what I ask possible in APRSISCE, ban a user from my iGATE 6 messages
There is a amateur operator in the Pittsburgh Metro Area who has been beaconing every minute while mobile. He was asked to change his beacon to no less than every 3 minutes and to use smart beaconing
There is a amateur operator in the Pittsburgh Metro Area who has been beaconing every minute while mobile. He was asked to change his beacon to no less than every 3 minutes and to use smart beaconing
|
By
John Seiler
·
|
|
APRSISCE32 and IS->RF 18 messages
I gather most APRS software filters out any packets with TCPIP in the path. I suspect APRSISCE32 does too? Thing is, my igate is bidirectional for messages, and unidirectional for position packets but
I gather most APRS software filters out any packets with TCPIP in the path. I suspect APRSISCE32 does too? Thing is, my igate is bidirectional for messages, and unidirectional for position packets but
|
By
Carl
·
|
|
FTM-300dr. It transmitting messages 7 messages
Having problem when creating a chat message in APRSIS32 can’t send the message won’t key the radio. I am sure it is a setting but can’t find it even though it used to work. All help would be appreciat
Having problem when creating a chat message in APRSIS32 can’t send the message won’t key the radio. I am sure it is a setting but can’t find it even though it used to work. All help would be appreciat
|
By
Steve Kiper WD4U
·
|
|
Bizarre open street map 2 messages
For those map lovers among us, https://openwhatevermap.xyz/#3/28.00/18.00 Lynn (D) - KJ4ERJ - Author of APRSISCE for Windows Mobile and Win32
For those map lovers among us, https://openwhatevermap.xyz/#3/28.00/18.00 Lynn (D) - KJ4ERJ - Author of APRSISCE for Windows Mobile and Win32
|
By
Lynn Deffenbaugh
·
|
|
KPC-3+ vs KISS (was: Password request) 2 messages
The KISS-type port provides initialization strings for a Kenwood internal TNC. Yes, I know the name is misleading, but it goes way back into ancient history. What you probably want is to lock your KPC
The KISS-type port provides initialization strings for a Kenwood internal TNC. Yes, I know the name is misleading, but it goes way back into ancient history. What you probably want is to lock your KPC
|
By
Lynn Deffenbaugh
·
|
|
Password request 2 messages
Hello All, I have just installed APRSISCE and intend to migrate to this from previously using Pinpoint. I understand that I will need a password to transmit via the internet. How do I go about receivi
Hello All, I have just installed APRSISCE and intend to migrate to this from previously using Pinpoint. I understand that I will need a password to transmit via the internet. How do I go about receivi
|
By
John
·
|
|
Location, duplicate packets, and connection text folders 7 messages
Thank you for permitting me into this group. I have had a IGate setup for a number of years and act as a fill-in digipeater for my area south of Pittsburgh. I have recently switched software from Pinp
Thank you for permitting me into this group. I have had a IGate setup for a number of years and act as a fill-in digipeater for my area south of Pittsburgh. I have recently switched software from Pinp
|
By
John Seiler
·
|