Is it OK to use the GPS ant connected to the TT4 to interface (via bluetooth) with the APRSIS32 program or does the GPS antenna need to be connected to the laptop? Under ENABLES, there is one for GPS.

I have the aprsisce program up and running. A friend told me you have to have a sound card program in order to connect with others. I have my radio tuned to 144.390 but I am not able to transmit. I d/

Good afternoon: I can't seem to find anything here or in the wikidot about this. I'm running APRSIS32 on a Windows 10 desktop. APRSIS32 is talking to UZ7HO's Soundmodem and displaying units that are b

I'm not sure if this is an APRSIS32 issue, or a general question about the APRS network. Either way, I find it to be baffling and mysterious. My small I-Gate, KD0TLS-1, experiences a flood of digipeat

I have been reading the posts in Ref to "IGate" contained on this great site. Having said that I am still a bit lost. Here is my operating station: 1 Yaesu FTM440XGR functioning as an Igate, it works

The set up. Windows 10 laptop with internal bluetooth disabled at the bios level. Bluetooth adapter - MSI Star Key Ver 222-BW. Yes I know it is old. Radio - using is a Yaesu VX-7R This setup worked gr

Interesting... I don't have a Drive D :-) Activity:WinMain:2022-07-13T21:22:10.609 ***** PaintMainWindow:Shadow BitBlt Failed in d:\compass\code\aprs\aprsisce\aprsisce.cpp line 40062 Error 6 ...DOUG K

I am curious about something. I am only moderately familiar with APRS and have been away from it for a couple of years. I operate portable nomadic and low power all year, usually on HF. I dug out my A

Positions of stations in MultiTrack maps seems to last a day or so. How can I shorten that retain time? Is it some parameter for “friends” in the .xml file? Thanks, Arnold, KQ6DI

I have the kg-uv3d which i am trying to feed to UZ7HO soundmodem for APRSISCE display. I think my issue is setting the squelch which is menu selected. No squelch seems to let through to much backgroun

I have used my Kenwood TS-2000 with any problems, now it will not Transmit and I can hear it receive packets but does not show or transmit. I have the port enabled I heave beaconing enabled. I know th

There has been a lot of discussion about COMM port sharing. Although the best method of sharing is still KISS over IP or AGW, it is possible to build a BUS to share COMM data. I had a discussion with

When I start to bring my map down to ground level, the map pixilates. This used to work fine so I must have changed something. Anybody know how to correct this problem? Any help would be appreciated.

When I go to Configure - Ports - MyNewPort - I see the Inherit box is checked but greyed out and there is no entry in MyCall-ssid box. Is this normal? I specified this information when I first started

There is a amateur operator in the Pittsburgh Metro Area who has been beaconing every minute while mobile. He was asked to change his beacon to no less than every 3 minutes and to use smart beaconing

I gather most APRS software filters out any packets with TCPIP in the path. I suspect APRSISCE32 does too? Thing is, my igate is bidirectional for messages, and unidirectional for position packets but

Having problem when creating a chat message in APRSIS32 can’t send the message won’t key the radio. I am sure it is a setting but can’t find it even though it used to work. All help would be appreciat

For those map lovers among us, https://openwhatevermap.xyz/#3/28.00/18.00 Lynn (D) - KJ4ERJ - Author of APRSISCE for Windows Mobile and Win32

The KISS-type port provides initialization strings for a Kenwood internal TNC. Yes, I know the name is misleading, but it goes way back into ancient history. What you probably want is to lock your KPC

Hello All, I have just installed APRSISCE and intend to migrate to this from previously using Pinpoint. I understand that I will need a password to transmit via the internet. How do I go about receivi