Trying to install on Windows 10 - getting a flashing bar shown below and progress is not moving - I put in my call sign and the passcode given to me by Lynn. Any idea why it's not working? 73's and TI

So I was looking at the Map. I see a line between an intermittent Digipeater, KD4DVE-1, and ME . I was wondering what the other Direct-RF paths are in my visual region? So, how to I change settings to

I will be moving my I-Gate to a structure higher up on my property. I'll be using a different computer because the current computer has several other functions that I use. My current hardware setup us

I am trying to help my friend suppress these warnings: 09:26:30> Mic-E:WD4U-7 Transmitted Status(Warning) I thought I had done so. Where are ALL the places that this message, from him, might be "activ

For some reason the Frequency Monitor feature has been enabled on my version and I cannot seem to turn it off. Any magic trick to disable it? Brian N2KGC

Not sure if this is possible, but is there a way to put in a second/backup APRS-IS server if the primary happens to go down? Matt K7OWW

I've attached a screen capture of my port log. I have paired the TNC3 with Windows 11 bluetooth. APRSISCE allowed me to configure the port. The port status is alternating between "Connect" and "Delay"

Would it be possible to get objects added to the enable menu? Cheers Tom kf6kyd

Hello group, and thank you for allowing me to join. I've been a ham since 1998, but just now exploring APRS. I'm looking for a modern APRS client to run on Windows 10, which brings me here. I will be

I have a uBlox GPS antenna that plugs into COM13 on the windows 10 PC . If I use their software, I see many many Satellites with excellent signal strength and stability .... according to their program

I note several stations on my APRSIS32 display who also have a blue Wx symbol. And, btw, I'll ask this on a D710 BBS also. How to I get the info from the Console to the Davis-APRS-Wx jack a 2mm 3-pinj

Best place is from the WIKI http://aprsisce.wikidot.com/downloads Also look at the development version option: http://aprsisce.wikidot.com/doc:development-version I also suggest joining the APRSISCE g

I was able to get my weather station to appear in APRSIS32 by adding the following to my upload destinations on my Meteobridge: You will need a APRS registration passcode using your callsign - I blank

If you look at the attached screen shot, I would like to figure out what might be causing this mess I think on of the paths may have a timimg issue (NC4HC-15) could this the problem? Thanks Rick, kd4d

In the lower-right quadrant of the screenshot is a local Igate/Digipeater, KG4DVE-1 . underneath the 146.94 TR object is " 8329mph ESE" . Occasionally I see something similar at his station, on the ma

Hello APRSISCE@groups.io Though I have Altitude checked, in several places, it is never displayed on the map. I wonder why that is. -- 73, KD7YZ Bob EM88LL

Hi everyone. I just got a Kenwood TM-D710ga and have been enjoying it. I’m trying to get some sort of APRS software running when I have the rig in the house. The first time I loaded up APRSICE I got a

Greetings..from India! I have just started using APRSIS32 again after a hiatus of 2 years, therefore there is something which I need to seek help for. First of all, about my installation: 1. Intel i5

Hi all, Anyone using APRSIS32 with VARA Soundmodem on HF? Is it possible? Has anyone attempted such a thing? I tried it using a KISS port connected to VARA via TCP port 8300 but there is no way to PTT

After years of reading about the inputting of NMEA data to APRSIS32, I thought I would see what's available, software-wise, to port data. I just got Android's ShareGPS to do so. Not understanding exac