Is there a translation table between the GPX symbol name in the <sym></sym> field and the corresponding APRS symbol? In the archives for this group, I found one, but it was a dead link. -- 73 de KB5PG

I have just upgraded the shack computer, nothing special just a Dell Optiplex but much better than the old Dell laptop that I was using. I have APRSIS running along with UZ7HO sound modem connected to

Iam tyring to figure out why we have Posits from overseas stations repeatedly coming out on RF here from our Igates onto RF when they are not setup to do this. It is however normal behaviour for a pos

I am trying to setup a filter to gate SPC products from IS to RF if they are within 100km of my location but I am stuck. m/100 b/SPC* ends up gating everyone within 100km of me. Any help?

I’m working at installing APRSISCE in my car using My D-700. Looking through the group, I see the program is apparently not supported on the D-700? It’s been a while - my last install used Streets and

APRSIS32 it opens 2 windows one loads all heard stations and the other only loads my location. I'm sure i have changed something to cause this but cannot find what it is. Any help would be appreciated

All: I have a question regarding HF and I-Gates. Most of my APRS experience has been limited to chatting on HF (Robust Packet) with a limited number of stations. I recently came across an I-gate stati

This just started happening or I just noticed it. When I start up Soundmodem and APRSIS Everything seems to work ok, but I just noticed that in the top of the activity box it says "Suspended" and at t

Hey all, While driving home tonight I was seeing (on my D710) IS stations being gated to RF that shouldn't have been that indicated they were TCPIP First, and W2CXM Last, normally this indicates that

Hey everyone, Had to re installs APRSIS32 this evening due to it having become unresponsive. I downloaded the zip, unzipped and selected the exe and after inputting the required information (call, pas

Right clicking on stations shows the attached box. What is the distinction between Heard By, Hearing, and Packet, and what is each line showing? I assume Packet is the Packet path. Also, which of thes

Has anyone tried using a Bluetooth GPS Receiver with a Windows 11 tablet? Prolific has yet to put out a driver that will work with the newest update of Windows 11 Home V22H2, so the GPS-5 Receiver wil

The programs & IC-9700 decode properly but when selecting "TRANSMIT" tab on the APRIS program the radio will not key. Any suggestions on setting for the IC-9700? Thanks!

I understand the task to be performed. Search and rescue of missing people is very similar to recovery of a high altitude balloon payload. Your total search area is somewhat defined, but the final sea

Hi! I've been trying to figure this out since the morning, but I'm a bit overwhelmed and I'm need on your help. I use OpenStreetMap, ThunderForest and Google Maps in APRS-IS32. I need to download an o

Hi Lynn and all, I use APRSIS32 on HF (30m) and I find it's APRS text message decaying algorithm too aggresive for HF use when it 1st starts sending an APRS text message. The way it works is FB for VH

The program is working fine on one of my computers but on the other one, the loading bar continuously flashes when I try to run the program and never loads. I enter my callsign and passcode and click

Hi Lynn, have been playing with MO lately and notice with the newest hydra that altitude shows as feet but looks like its being decoded as meters. See screen shot. KB3ZTO-2 is a fixed digi and he has

become the needed igate

Worked fine up until last month. Did not make any changes. Anyone else with this issue?