Hello experts. Kind of iGate rookies questions. How do I know if iGate is correctly setup? I look at the iGate log, I see bunch of information scrolling up but how do I know they even make it to APRS

using aprsis32 on a win10 machine. When I generate a beacon, message gets highlighted in red only on aprsdirect, and says that it was received in wrong order. tried enabling and disabling timestamp HH

I am unable to transmit through the program. When I look at CONFIGURE>PORTS>FTM-400(the radio I am using) Xmit Enable is not checked. Even if I check it it will not stay checked, when I look again, it

I’m new to aprs. I’m using a ftm100de and kantronics kpc-3 plus. My question is, what computer program should I use to configure the kpc-3, to use with aprs.

Hi All. I have an issue where after the last update a couple months back, my computer has lost all comms with the radio/tnc. I had everything shutdown for a month or two till I had more time to play w

Hello, I'm new to groups.io and I'm new to this software! I have two questions and hopefully I can get on my way. The spot that I live in is fairly rural and I'm trying to set up an Igate and possibly

I am using an FTM100DE and a Kantronics PLC 3 plus. My question is what program do I need to download in order to configure and use it with APRS. Mike N3MRM

Hi Lynn I am not receiving Satellite Telemetry. The box opens stays blank and the time and date box is a steady read. I am running the latest Development Version. Thank You , Tom N2UFM

A few of us in the Vancouver BC area have been pushing APRS. Lately ISS is been coming up. Is there any setting in Path or anywhere else. I'm using a Mobilink TNC3 with a cheap HT normally on 144.390.

In the past I have asked if its possible to tune a D710 to the frequency listed in the frequency monitor. I was told it is a cat function which is something APRSIS does not do. In reading the Wiki it

Greetings, It has been a while since I tried converting a Google Maps travel solution to GPX. I just tried it and had success. It has never been simpler! https://mapstogpx.com/ Give it a shot! Best re

I am not sure what you are referring to with"Filled the required fields on start up. Aprsis32 no responding message?" What are you expecting? Are you getting stations in the scroll bar (left side) tha

Has the "experimental" lightning feed been suspended? Glenn-KF0ED

Are you running the application in a protected area? Protected areas such as: 1. Inside the ziup file -> you must extract the EXE file into a local unpretotected folder 2. Extracted into "Program File

I've turned off the Beacon on the APRS-IS Port and also set my 710-APRS Port to No Gate ME. I sent a message directly from my radio and saw that appear on the target AB1II-7 when I clicked it's icon o

First I tried the simple solution. Since the latest version of Raspbian is based of Debian Buster, I decided to just install WINE sudo apt-get install wine I got (what I expected) BAD executable error

Basically your putting the D710G in kiss mode, meaning the model is dumb and APRSIS32 is doing all the work, encode and decode. The advantage you get with the D710G is that you can actually use the mo

Mike, I am posting your Pi question to the main group. Of course APRSIS32 is a Windows application for x86 processors. I do not know of anyone running this on a Pi I know some who use the Pi as the ps

I did a search in this group for "IC-9700" and got zero hits! Anyway, I'm trying to connect to my IC-9700 through my PC sound card. In Ports, I create a new AGW port, I select TCP/IP, I enter in the I

Hi all, New to the forum and have been browsing around looking for info on configuring APRSIS32 for use with the Kenwood TM-D710GA in a MOBILE application with the GPS of the 710 also feeding APRSSI32