To all, Just in case any of you are wondering why the recent poll was posted about HF locator modes, I've been tinkering with JS8Call for use between myself, my son, and my son-in-law all here in Flor

I think I asked somebody about this. However I kenno find the wee reply. see this Digi-Log from my View Logs Digi: ---------------------------------------------------------------- WinMain:2019-11-21T1

The passcode provided will allow you instance of APRSIS32 to send data to the internet (APRS-IS), which includes the feeds to aprs.fi. If you leave the passcode at -1 APRSIS32 will work without any pr

Been in there since 2007 or so. The whole topic is on http://aprs.org/localinfo.html. I use it all the time in new areas to see what voice repeater is recommended in the areqa. Bob, WB4APR

'no-84' bird is active on packet , the ISS has not been for some time.. lots of good stuff by Patrick on how to work it. https://www.amsat.org/wordpress/wp-content/uploads/2018/03/FalconSAT-Stoddard-p

..... Using it to set "*" for active in column H, Thanks on that find! which makes me ask if it's possible to auto switch freq's by APRSIS/32 ? Or by some other program compatible with all this? Seems

I do not see a way in APRSIS32 to read or see or log data coming in from the SignaLink Soundcard which is plugged into the D710GA data port. However, AGWPE can see it as here is a recent decode: -----

This is weird. I NEVER get Lynn's Posts via the email "List" of this board. And ... I only see ONE of his via the Web Interface even though I see other guy's quoting Lynn, in this thread. Furthermore,

SmartBeaconing is a Kenwood radio thing and not APRSIS32, so I'm not sure why it is mentioned in the context of the packet scroller and (presumably) telemetry settings. Unless you meant GeniusBeaconin

Bob, I'm not familiar with UISS, but you have some interesting statements in the quoted paragraphs below. Can you please expand on what you mean by the following: "AX.25 QSO" - Yes, AX.25 is the base

AGW supports multiple radio interfaces into a single instance. These are identified as "Ports" with numbers starting at zero (at least internally). APRSIS32 processes data received on any AGW port, bu

Bob, You might want to look at the Configure / Scroller options. These affect what packets are put into the packet scoller pane. Of particular interest for your application: Configure / Scroller / Sho

Note to all: The trace log windows in APRSIS32 support the clipboard! You don't need to do screen captures and post pictures. To copy the entire window contents, just hit the Copy menu option. Boom. P

I changed a setting on the installed APRSIS32 and was unable to get it corrected. I thought I'll just delete it and start over, however when I downloaded it from the website things went bad from there

I have the D710 APRS port config box set with every box checked (on) except No-Gate-ME is unchecked. Something I do notice, and keep seeing from port to port, is that when I just checked that D710 APR

I discovered that the setup did not like me using VSPE Virtual Serial Port Emulator. I'd made COM4:, the D710GA Port virtual to COM12: (for sundry reasons. now I see a brief listing which ended quite

when I look at Configure- Port and Port(KWD710(Pkt), the box seems complete. Enables Port Port(KWD710(Pkt) is checked. Yet if I view the log I see a repeating : ---------------------------------------

Why doesn't the MultiTrack window ever come up in the last window size that was used, or ANY useful window size I've previously used????? This is very annoying. EVERY time I use a MultiTrack window is

Using Win 10/64 on a Panasonic Toughbook with built-in gps. Windows sees the gps on Com3, 4800b and other programs have no problems using the gps. The NMEA port is set to Com3, 4800b and the GPS is en

I wish! Then I could just release it! The current development version is same one that I run here and represents the latest version of the source. APRSISMO, on the other hand, is very out of date, but