i want to use my scs robust packet tnc in kiss mode with aprsis32 , need how to edit aprsis32.xml to init it in kiss mode . a copy of the xml file for it will be apreciate. tnx Jean-Pierre ve2se

Can someone please show me how to write the code for a filter to be able to turn off objects like winlink with a red diamond and W? Also black diamond with a D. I have tried filter –o/a/DW and -0/a\DW

Hi, I noticed this: <OpenCmd>^027~!!1</OpenCmd> <OpenCmd>^064^075!!0</OpenCmd> <CloseCmd>^192^255^192~!!1</CloseCmd> <CloseCmd>^027~!!1</CloseCmd> Julian, G4ILO I get the escape, @K, but what does the

Well, not listed ANYWHERE, except, in a forum it says it puts it out of kiss mode. problem solved. https://linux-hams.vger.kernel.narkive.com/yBAbPGB4/tncs-and-kiss-mode

HI I believe I have the baud rate set correctly in the xml file, but I need some kind of passcode? And how to I set my fixed location on the map? I already have a TR cable for the radio from the SCS.

Hi all, I found some references to using APRSis32 for crossband, but haven't figured out some of the specifics. I already have two instances of APRSis32 running, one on a 2m radio, the other on a sepa

I hope all will have a better year than the last. My big thanks to those that spend a lot of time providing assistance/suggestions/guidance to various questions people have asked. Let me tell you this

I just pushed out a new Development release that provides more information in the IGateEnabled trace log to assist in debugging failure to establish a Control-I IS to RF gating filter. At least I THIN

Hi All Seasons Greetings!! I am an active users of APRS32 Windows App with Kenwood TM-D710A. I have Yaesu FT-2D from New Delhi, INDIA. I am currently getting APRS Packets Transmitted from Computer APR

I finally got around to re-setting up my APRS gateway. I notice that if you download the software using IE, the maps do not load. Using Chrome solved that problem. I set up APRSIS and saw both my loca

DOWNLOAD APRS

I am running APRSIS32 2020-10-27 1838 (Development Version) and noticed something different about NMEA logging. I am running the same uBlox M8 modules I use at work with a different configuration. On

Hello: I am new to APRSISCE/32. I have followed the setup instructions and all works well on the Internet connections, but the radio port does not want to transmit, and I do not see from the logs that

Can anyone tell me what I might check to determine why a station shows up on RF (AGWtracker and APRSIS32) but not APRS.FI Mike - W7OSG

On the left side of the screen is a list of callsigns heard, but they are in different colors and some have an asterisks after it and some have a asterisk and a number after it etc. Is there somewhere

Why do some stations show up on APRS.FI and not on APRSIS32 and vice versa? Thanks Mike - W7OSG

In all of the years I have been running APRS_IS I have never seen this before, I have 2 computers doing the same thing. CWOP is operational. I have no stations populating on the screen other than wx I

On Halloween we ran an ARES event, Pumpkin Patrol, and had many of our posts run various cellphone APRS apps since few have RF rigs. I was using APRSIS via agwpe to igate the traffic to the RF only st

Hi Lynn, How long do the support packets (EQNS, PARM, UNIT) for telemetry stay in the XML? I assume they ‘age out’ at some point. Thank you! Fred N7FMH This email has been checked for viruses by Avast

Does anyone know why I am getting this on APRS.FI say Invalid Uncompressed location. 2020-11-27 11:50:04 EST: N1EDF>APRS,TCPXX*,qAX,CWOP-4:@271652z42.00.00/71.00.00_312/000g001t050r000p000P000b10168h9