Hello all, I'd like to be able to have APRSISCE connect to my TinyTrak4 Bluetooth module and have access to both the TinyTrak4 data and GPS data. I can get APRSISCE connect to either device but not bo

This seems to be the key to my problems. I hear other stations loudly and clearly, but they don't show up in any raw logging even tho the decode light is lit up and the signal is nice and steady. Any

Tho tuning off of its resonant frequency in general it's a better listener. I might switch to my folded dipole if this doesn't work.

try checking your coverage on aprsdirect I will try to get my 30m gate back online and listen , also do we have a 40m frequency for after dark ... i think I have one in the memory bank around 7,109.5

As far as I know I have no way to know who is using APRS on 10.147.3 USB in the US (tho it's the allocated frequency). I'm definitely transmitting and when it hears some other signal it's definitely r

Hi all, Is it possible to map JS8Call stations to a local APRSis32 instance, on a computer with no internet access? I've tried setting a port up in APRSis32 as "TXT" type and pointed it to 127.0.0.1 o

i want to use my scs robust packet tnc in kiss mode with aprsis32 , need how to edit aprsis32.xml to init it in kiss mode . a copy of the xml file for it will be apreciate. tnx Jean-Pierre ve2se

Can someone please show me how to write the code for a filter to be able to turn off objects like winlink with a red diamond and W? Also black diamond with a D. I have tried filter –o/a/DW and -0/a\DW

Hi, I noticed this: <OpenCmd>^027~!!1</OpenCmd> <OpenCmd>^064^075!!0</OpenCmd> <CloseCmd>^192^255^192~!!1</CloseCmd> <CloseCmd>^027~!!1</CloseCmd> Julian, G4ILO I get the escape, @K, but what does the

Well, not listed ANYWHERE, except, in a forum it says it puts it out of kiss mode. problem solved. https://linux-hams.vger.kernel.narkive.com/yBAbPGB4/tncs-and-kiss-mode

HI I believe I have the baud rate set correctly in the xml file, but I need some kind of passcode? And how to I set my fixed location on the map? I already have a TR cable for the radio from the SCS.

Hi all, I found some references to using APRSis32 for crossband, but haven't figured out some of the specifics. I already have two instances of APRSis32 running, one on a 2m radio, the other on a sepa

I hope all will have a better year than the last. My big thanks to those that spend a lot of time providing assistance/suggestions/guidance to various questions people have asked. Let me tell you this

I just pushed out a new Development release that provides more information in the IGateEnabled trace log to assist in debugging failure to establish a Control-I IS to RF gating filter. At least I THIN

Hi All Seasons Greetings!! I am an active users of APRS32 Windows App with Kenwood TM-D710A. I have Yaesu FT-2D from New Delhi, INDIA. I am currently getting APRS Packets Transmitted from Computer APR

I finally got around to re-setting up my APRS gateway. I notice that if you download the software using IE, the maps do not load. Using Chrome solved that problem. I set up APRSIS and saw both my loca

DOWNLOAD APRS

I am running APRSIS32 2020-10-27 1838 (Development Version) and noticed something different about NMEA logging. I am running the same uBlox M8 modules I use at work with a different configuration. On

Hello: I am new to APRSISCE/32. I have followed the setup instructions and all works well on the Internet connections, but the radio port does not want to transmit, and I do not see from the logs that

Can anyone tell me what I might check to determine why a station shows up on RF (AGWtracker and APRSIS32) but not APRS.FI Mike - W7OSG